View previous topic :: View next topic |
Author |
Message |
m Fitz New User
Joined: 04 Feb 2013 Posts: 3
Report to Moderator
|
Posted: Mon Feb 04, 2013 2:57 pm Post subject: 730 front wheels |
|
|
I have a question on the front wheels for a 730 CK. My tractor currently has 15" wheels and the rim width is about 9",and has a deep offset, is this correct? My junker 730 has 15"X6" rims that are all orange, the other tractor has two tone rims, is this right? |
|
Back to top |
|
 |
Adirondack case guy Tractor Guru
Joined: 04 Mar 2010 Posts: 17474
Report to Moderator
|
Posted: Mon Feb 04, 2013 3:10 pm Post subject: Re: 730 front wheels |
|
|
Looks like a late model that had 7.50x 15s on it.
Loren |
|
Back to top |
|
 |
Mike Fitz Long Time User
Joined: 10 Mar 2009 Posts: 593
Report to Moderator
|
Posted: Mon Feb 04, 2013 4:27 pm Post subject: Re: 730 front wheels |
|
|
Thanks for the reply, would these be right for a 1966, 741? Mike |
|
Back to top |
|
 |
Adirondack case guy Tractor Guru
Joined: 04 Mar 2010 Posts: 17474
Report to Moderator
|
Posted: Mon Feb 04, 2013 7:42 pm Post subject: Re: 730 front wheels |
|
|
They would have been an option . 7.50 16 would have been standard. I should have stated in the preivious post 7.5Lx15 tires They were wider and higher.
Loren |
|
Back to top |
|
 |
m Fitz New User
Joined: 04 Feb 2013 Posts: 3
Report to Moderator
|
Posted: Tue Feb 05, 2013 6:16 am Post subject: Re: 730 front wheels |
|
|
That's what I was looking for, thanks Loren. Mike |
|
Back to top |
|
 |
Ande Tractor Guru
Joined: 01 May 2006 Posts: 7253
Report to Moderator
|
Posted: Tue Feb 05, 2013 6:24 am Post subject: Re: 730 front wheels |
|
|
It will say right in the serial # plate if it is.Most likely a "731",but who knows,a pic of the tractor would tell us if there is no plate |
|
Back to top |
|
 |
|