Belarus 250AS Open Injection Pump Cover Plate Foreign Object

[Big_Guy]

Helping a good friend get his 250AS sorted out. Believe he has posted here on other issues as we have been getting it running again. The feedback is very helpful.

We removed the cover Plate for the Injection Pump on the 250AS. The Plate with 4 screws. Bottom 2 screws were still factory tie wired. This small "L" shaped wire Pin has laying inside the Cover. Anyone here recognize this part? Did something come apart?

Thanks
Bruce
Texas

 

[Jim.ME]

Helping a good friend get his 250AS sorted out. Believe he has posted here on other issues as we have been getting it running again. The feedback is very helpful.

We removed the cover Plate for the Injection Pump on the 250AS. The Plate with 4 screws. Bottom 2 screws were still factory tie wired. This small "L" shaped wire Pin has laying inside the Cover. Anyone here recognize this part? Did something come apart?

Thanks
Bruce
TexasView attachment 66682

You might want to post about this on the Belarus Forum in the manufacturers section here. Not saying it will get you an answer but it won't get buried by other threads as quickly so there is a better chance of the right person seeing it on the forum specific for the manufacturer. I see there is some current activity regarding the 250AS tractors on that forum. You can use the "Contact Us" button at the upper left and ask a moderator to move this thread to the Belarus Forum. Good Luck.

 

[Big_Guy]

You might want to post about this on the Belarus Forum in the manufacturers section here. Not saying it will get you an answer but it won't get buried by other threads as quickly so there is a better chance of the right person seeing it on the forum specific for the manufacturer. I see there is some current activity regarding the 250AS tractors on that forum. You can use the "Contact Us" button at the upper left and ask a moderator to move this thread to the Belarus Forum. Good Luck.

Thanks Jim.