Kelly in tx
Member
Help, please. The 1 1/4' steel shaft inside the gearbox is broken. It is the shaft with the chain sprocket attached. What do I do? Thanks
- Thread starter Kelly in tx
- Start date
Brendon-KS
Well-known Member
- Location
- Goessel, KS
It looks like the output shaft you're needing is 700703549 and it is listed as "in stock" at AGCO for only about a hundred bucks. Here's the website to the parts diagram: https://parts.agcocorp.com/us/en/apbsearch?q=hesston/00707110/l&name=1110+/+1120+MOWER+CONDITIONER
Note that there are some shims involved to set the bevel gear backlash (item numbers 18 and 19 on the diagram) so depending on how the stackup works out with the new shaft it is possible you might need one or more to line everything up. While you're in there might also be a good time to install new bearings and seals as well but that might depend on how yours look once you get things apart.
Note that there are some shims involved to set the bevel gear backlash (item numbers 18 and 19 on the diagram) so depending on how the stackup works out with the new shaft it is possible you might need one or more to line everything up. While you're in there might also be a good time to install new bearings and seals as well but that might depend on how yours look once you get things apart.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy