Limiter Chains on 2N

[Del Huebner]

Trying to figure out where to connect limiter chains on my 2N for the brush hog. Any suggestions appreciated.

 

[deanostoybox]

Chain hangers (with the keyhole slot) go on outside of the rocker for the top link. The 3/4 pin needs to be long enough to go through the rocker and both chain hangers. 4" pins work fine. (4" between head and lynch pin hole, mine are 5-3/8 total length.) Of course the chains go on the implement's lift pins (7/8" hole). Also if you are using the stabilizer bars you may need longer lift pins on the implement.

 

[Del Huebner]

Thank You for your help and I just happened to have a 4" pin on hand.