Need help with John Deere 1010w 4 Cylinder gasoline Main bearings

[JWW]

Hi all,
I‘m relatively new to the rebuilding world and am having an insane time finding Main bearings for my early model 1010w.
Unfortunately, my 1010’s engine serial numbers are missing. It’ an early gasoline 4 cylinder model with .010 inch oversized bearings that have no hole or groove in them. I’m hoping someone can point me in the right direction as these bearings are all that’s left between me having a great little working tractor or a really large boat anchor. I’ll attach some pics of the old bearings. Any advice would be appreciated.
JW

 

[Tx Jim]

With tractor serial # below 031,000 rear main thrust brg .010 should be part # AT24425 & other .010 main brgs are part # AT24414. See following links.
https://partscatalog.deere.com/jdrc/sidebyside/equipment/59702/referrer/navigation/pgId/101883

Main Bearings - .010" Oversize - Set fits John Deere 1010 2010 115 145 AT24119

Main Bearings - .010" Oversize - Set for John Deere Engine(s) 115, 145, Tractor(s) 1010, 2010. Replaces John Deere OEM nos AT24414, AT24119, AT24425, AT24431.

www.tractorpartsasap.com

 

[Duner Wi]

Couple of numbers to search for,
Sealed Power MS595p or
Federal Mogul 4145M

 

[used red MN]

Couple of numbers to search for,
Sealed Power MS595p or
Federal Mogul 4145M

Curious why you “struck through” part of your reply?

 

[Duner Wi]

I didn't strike thru, this site did it. possibly because this site lists the main bearings but says not available online, lease call.

 

[Mark-Ia]

"Google" AT24425, several sources show up.

 

[JWW]

Thanks for all the advice. I’ve looked all over for the bearings you guys mentioned but no one has had any in stock for at least the last 9-12 months.

 

[used red MN]

I didn't strike thru, this site did it. possibly because this site lists the main bearings but says not available online, lease call.

Interesting, Thank you!

 

[Fixingfarmer]

Take a cap and the bearings to a machinist who can measure them it’s not quite as easy as taking a rod in that he can measure both sides with it bolted together but he should be able to help you out especially if it has a part number stamped on it there’s a lot of suppliers who will list something in their catalog for them to try

 

[Mnethercutt]

Not sure if these will be too late for your engine or not as they're listed for SN 15082 and up, but I used this site when I rebuilt a 1010 gas about 4 years ago and it looks like they have the mains in stock: https://www.agkits.com/john-deere-115-gas-main-bearing-set-4344m.aspx