(800) 853-2651
SHOP NOW

Search results

  1. Scott 730

    Duplicate threads

    Are duplicate threads allowed here?? In the past several days there have been a few new threads started in multiple categories. Asking for a friend.
  2. Scott 730

    4020 Powershift pressure test results are in. Diagnosis needed.

    I acquired a 71 Diesel PS a few years back in non running condition. Supposedly had sat for maybe 8+ years. Got it running after a cleaning and re seal of the injector pump. Changed hyd filters and pulled sump screen which was nearly pristine. Oil and filters have been completely changed twice...
  3. Scott 730

    1971 4020 PS test port thread size and passage flushing

    Need to do some tests on B3 as I have an issue with reverse. Are the test ports 1/2"ORB thread, or something else? Also on the bottom of the trans case, inboard from the shift valve, there is another port labelled B3. Can that plug be removed temporarily to flush the passage when moving the...
  4. Scott 730

    My forum wish

    How hard would it be to make it a requirement to have at least a vague location in everyone's profile? Don't need your address, just a state would sure help. There are posts that have no meaning without the context of where the poster lives. Weather, auction prices, scrap prices, fuel...
  5. Scott 730

    Editing and deleting posts

    There seems to be a time frame of sorts where you can no longer edit a post after it has been up for a period of time. Also have not found a post delete button yet. Thanks for all your work on this new adventure.
  6. Scott 730

    My observation concerning new format

    Rather surprised at the struggles some are having adapting to the new YT. This site now closely resembles most other sites I am familiar with and frequent. It almost seems that the only format they know is the old YT. Do they not frequent enough other sites to be more familiar with what we have...
  7. Scott 730

    Sigh..... another 4020 repair for next spring

    71 Powershift park just gave up the ghost for no apparent reason. 2 year old cable is fine. Lever and shaft going into trans case is rotating fine. Good thing the 158 loader and 8' snowblower will keep it from rolling away until I can fix it............ :
  8. Scott 730

    1971 4020 PS 540 pto stub shaft differences

    Went to hook my #5 mower to the 4020 for the first time after selling the 730D and discovered the 4020 shaft does not have a hole through it like the 730 did. Came home from the salvage yard with a different stub shaft with the hole in it. At first glance they look the same, but on my original...
  9. Scott 730

    FC and FCA cultivator differences

    Looking to get a manual for my Case (Glencoe) field cultivator. Looking at manuals online I can't see the difference in the few pictures that are in the listings. So,,, how do I tell which model I have? Is there a visual difference somewhere ?
  10. Scott 730

    4020 fuel line from tank to pump

    Its been a week long rodeo with fuel tank issues on my 71 4020 Diesel. After all that, now the steel line from the tank to the lift pump is dripping near the frame clamp. Likely got tweaked around when re installing the tank. Either rusted or cracked I guess. 1. Can that steel line be...
  11. Scott 730

    Green Parts of VA-- still open??

    Maybe I was under a rock and missed any news, but why is there no price listed on any parts on the website?? Everything is $0.00
  12. Scott 730

    4020 plastic fuel tank V 2.0.

    Tank arrived today. Fast shipping, it was ordered last Friday. That's where the good news ends. The surface around the sending unit hole is no where near flat. I laid a 1" flat washer on the opening and there is nearly a 1/16" gap under the washer in the middle. I can't believe they send these...
  13. Scott 730

    Hypothetical sparky question

    If one had a tractor that was about 200' from the nearest outlet and for unseen reasons needed to start it in the winter, what exactly happens if you have 200' of 12ga extension cord running to it for the block heater? Does the whole cord generate some heat? Is any heating relegated to the...
  14. Scott 730

    4020 poly fuel tank installation

    For anyone that has installed one, did you put anything under the tank where it sits on the steel support? There are remnants of something there that was factory installed under the steel tank. Maybe a strip of epdm rubber would be a good idea, or not? Thanks.
  15. Scott 730

    Cleaning bio diesel goo

    Had an unseen, very slow fuel leak on the bottom of a tractor fuel tank. How does one clean up the gooey, sticky mess left behind by the bio??? Brake or carb cleaner don't seem to phase it. Would E 85 cut through the sticky goo? Any other suggestions?
  16. Scott 730

    730 Diesel transfer pump removal

    Why is the pump fighting me to remove it? I thought there is just a tang on the pump shaft that mates into a groove in the governor. Shouldn't the pump just pull straight out after the 2 mounting bolts are removed? I can rotate the pump housing, but it will not pull free.
  17. Scott 730

    Late 4020 PS steers hard

    1971 4020 Diesel PS has 2 finger steering during normal driving down the field as you make normal corrections. When turning around on headlands, if you steer fairly slow it is still 2 fingers. But the faster you try to turn the wheel, the harder it is to turn, as if there is less power assist...
  18. Scott 730

    730 Diesel countershaft bearing cap removal

    Been too long since I've been inside the reduction cover. Can't remember if the countershaft bearing cap will come off with the pto idler gear and reduction gear in place. Thanks!
  19. Scott 730

    4020 wheel weight question

    Have a chance to buy a few correct weights for my 4020. It has 16.9 38's. Bone dry, never had fluid in these tubes, tires and rims. Would adding 2 weights per side be enough benefit to offset the lightening of my wallet? Has a 158 loader used for light duty property maintenance mostly. Some...
  20. Scott 730

    730 Diesel head gasket question

    Removed the clear shrink wrap from my new head gasket and found it has a slightly sticky clear coating on it. I am not sure how to proceed now. I was all set to spray copper coat on it before installing it, until I unwrapped it. So, what is on it to give it that sticky feeling? Do I remove...
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top