Mike industrial tractor
Member
Hello;
I had some overheating issue with my 1978 ford 555 2.3 litre diesel. I wondered if anyone knew what psi this system should use for rad cap pressure as I can’t seem to find it in the manual ( if you’ve seen this in the 555 manual please let me know what page).
I removed the thermostat however still don’t see much flow. There is very little movement of water very sable so was looking for a better test if water pumps working….
I wondered if there is a good port on the tractor to hook up a pressure gage to check if water pump is working to pressure.
Thanks
I had some overheating issue with my 1978 ford 555 2.3 litre diesel. I wondered if anyone knew what psi this system should use for rad cap pressure as I can’t seem to find it in the manual ( if you’ve seen this in the 555 manual please let me know what page).
I removed the thermostat however still don’t see much flow. There is very little movement of water very sable so was looking for a better test if water pumps working….
I wondered if there is a good port on the tractor to hook up a pressure gage to check if water pump is working to pressure.
Thanks