I own a john deere 2750 with cab(Row Crop) serial number 5288XX. I had it split at the transmission this winter and once reassemble my PTO doesn't work correctly. I didn't touch anything related to the pto other than the hi/lo valve and the suction tubes. The sump screen was clean when checked and the hydraulic filter was replaced.
The PTO turns on and off but when it is on it has no force to run anything. It can be stopped by hand while the tractor is full idle. I adjusted the valve located on the floor in front of the seat from all the way on to all the way off and it didn't make a difference.
Is there any pointers available as where to look for my issue?
Thanks
The PTO turns on and off but when it is on it has no force to run anything. It can be stopped by hand while the tractor is full idle. I adjusted the valve located on the floor in front of the seat from all the way on to all the way off and it didn't make a difference.
Is there any pointers available as where to look for my issue?
Thanks