acalkins1957
Member
I am installing a 70-front loader on my case 995. I have read on other threads here about the "normal" loader for the 995's being slow due to hyd press and max flow rates. This loader came with 1/2" hoses to 5/8" connectors. My question is: would I be better off switching all the hoses, both press and return to 3/8", (I have the 70 parts manual and it lists 3/8" hoses, not 1/2") or would it be beneficial to leave the return lines at 1/2"? The other part of that question would be is, would it help to also leave the press line from the tractor to the loader control valve at 1/2"?
Thx in advance!
Thx in advance!