Recent content by 03

  1. 0

    Snow blower for 8N

    Yes, it was exactly like that although I don't remember the make .
  2. 0

    Snow blower for 8N

    When I was a youngster all we had on our 100 acre farm in Ont. was an 8N. My dad bought a five foot pull behind V type blower and the 8N worked well with it. I was the designated operator . When the snow drifts were too high I would back into them with the three point all the way up and then...
  3. 0

    Ford 501 Sickle Mower Mystery Spring

    I've learned that those bolts where the pitman broke have to be checked for tightness periodically . They loosen up for a variety of reasons and as soon as they get a little loose they egg out and break the pitman.
  4. 0

    baler choices

    I have a 336 baler and I bought a second 336 as a backup. The second 336 would plug at the end of the auger all the time. Upon studying the augers on both balers I could see the plugging auger was not aligned. The previous owner must have picked up a fencepost or large branch and...
  5. 0

    ArleninOr..Haybob 360 raking

    They are made to do left turns. You just have to swing the bracket out of the way, the one that locks it in transport mode. Then it can "hinge" itself around your left hand turn. For right hand turns I pick up the three point a tad, I don't want to drag the tires sideways to much.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top