1893 Case Shaft Driven Threshing Machine. 12 Horse Sweep Power with all accessories. Good Condition
-
4
4140 or bust FarmerZeb 4140 or bust wrote on FarmerZeb's profile.
Hi Paul,
I saw your post about your 4000 loader backhoe. I have the same exact tractor but without the backhoe but would like to add one. I can find plenty of information on adding a backhoe without a loader, but not much with a loader. If you see this, I'm wondering if you would mind sending pictures of your backhoe and the subframe brackets and how they interact with the loader frame.
Thank you,
Ed
I saw your post about your 4000 loader backhoe. I have the same exact tractor but without the backhoe but would like to add one. I can find plenty of information on adding a backhoe without a loader, but not much with a loader. If you see this, I'm wondering if you would mind sending pictures of your backhoe and the subframe brackets and how they interact with the loader frame.
Thank you,
Ed
For Sale: SD-3 Sheppard Diesel. Engine is stuck. Narrow Front. Needs restoring. Complete. Can send photos by texting on phone. Please call. 515-320-5oneninezero.
1893 Case Shaft Driven Threshing Machine. 12 Horse Sweep Power with all accessories. Good Condition
-
O
old truck lover MMDEL old truck lover wrote on MMDEL's profile.
would you like my number to call me about the uni's
1893 Case Shaft Driven Threshing Machine. 12 Horse Sweep Power with all accessories. Good Condition
1893 Case Shaft Driven Threshing Machine. 12 Horse Sweep Power with all accessories. Good Condition
-
H
Hertenstein the tractior vet Hertenstein wrote on the tractior vet's profile.
Hello,
Thanks for the response on the 706 with the C-301 engine. What other challenges should I be looking for?
Thanks for the response on the 706 with the C-301 engine. What other challenges should I be looking for?
Popped the crank out the other day, that last main cap was in there hard. Last main wasnt nearly as bad as the other two. Now I just need to get the block and crank down to the engine guy to get the block boiled and ask for bearing specs and a polish.
-
A
Alan K Mike(NEOhio) Alan K wrote on Mike(NEOhio)'s profile.
Hi Mike, I had read a previous post from a few years back on a 1209 JD mower conditioner. I believe you mentioned you had a copy of the technical manual. Would you be able to email that to me? My email is moline at woodstocktel.net
I am mainly looking at replacement of the rubber roller bearing replacement on the right hand side, just behind the small drive sprocket. Thank you very much.
I am mainly looking at replacement of the rubber roller bearing replacement on the right hand side, just behind the small drive sprocket. Thank you very much.
Attachments
Have had the Super C torn apart for awhile. The rod journals checked out with the dial caliper. Still have to get the rear main seal off and get the crank out. Have to clean out the transmission bellhousing, might need a new input shaft, shes pretty shredded either from whoever put the combine engine in or just wear and tear. Main bearings are smoked though.
-
R
Red 56 Binder StuartIowa Red 56 Binder wrote on StuartIowa's profile.
How did you come out on the disk ?
Hey Jon, I saw on a post in May, that you are looking for a pair of side shields. I do have a pair. If you send me your phone number I can send pictures. The best part about this, is, I'm just down I-35 west of Des Moines a bit. So not too far from you. gobble Tom Hagen
Hello looking for assistance on an independent PTO CABLE.
Tractor : Ford 4000
Transmission : Select Zero Speed, 10 forward 2 reverse
Issue: PTO shaft does not disengage when T-Handle is pushed in.
Looking for info to troubleshoot PTO Cable Assembly, and subsequent parts down the line.
Looking for a good manual discussing the independent PTO assembly and setup & troubleshooting .
Any help would be appreciated.
Tractor : Ford 4000
Transmission : Select Zero Speed, 10 forward 2 reverse
Issue: PTO shaft does not disengage when T-Handle is pushed in.
Looking for info to troubleshoot PTO Cable Assembly, and subsequent parts down the line.
Looking for a good manual discussing the independent PTO assembly and setup & troubleshooting .
Any help would be appreciated.
I saw you had a problem with tractor stuck in reverse. What solution did you come up with to free it up? Mine is a Massey ferguson to-35. 1955 or 56 I think. worked great when parked. A couple months it set while I had surgeries. Started right up up shifter won't move and stuck in reverse. Can't find any information on this.
-
M
Martin Seebach flying belgian Martin Seebach wrote on flying belgian's profile.
If same engines probably will. If engines are only a few years apart and same specs, probably will. Our loader/scraper JD 300 Industrial has same engine as swather, 1.8l 4 cylinder and I stole the fuel pump from baler (NH) with same mounting holes and mating shape as tractor, works fine. Living in Brussels was a wonderful. So how are the banking characteristic on le Tracteur Aeroporte
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy