1950drew's latest activity

  • 1
    1950drew replied to the thread MF 135 clutch trouble.
    Checked with unbolted pp and adjusted with correct tools and new disc.
  • 1
    1950drew replied to the thread MF 135 clutch trouble.
    Old pressure plate is 5.98" from top of straight edge to table top and new one is 5.92". could that small difference be the cause?That's...
  • 1
    1950drew replied to the thread MF 135 clutch trouble.
    But thanks for the idea.
  • 1
    1950drew replied to the thread MF 135 clutch trouble.
    Starter bolts are not a problem.
  • 1
    1950drew replied to the thread MF 135 clutch trouble.
    Pilot bearing is seated as far as it will go. But I am going to pull it and make sure it is the coreect one. it may be to thick.
  • 1
    1950drew replied to the thread MF 135 clutch trouble.
    I'm gonna take it completely apart and start over. Discs aren't bent, relase bearing is new, we'll see.
  • 1
    1950drew replied to the thread MF 135 clutch trouble.
    Had it apart a 2nd time. I can't see anything wrong. I have put over 50 clutches in over the years. Never had this problem.
  • 1
    1950drew replied to the thread MF 135 clutch trouble.
    Everything is installed correctly. dual clutch is the correct one with 25 spline pto disc. ii have pushed it all the way together with...
  • 1
    I put a clutch in a 1974 MF135. When I bolt the tractor together it locks up the engine and transmission. I can separate the tractor by...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top