Recent content by 2thmkr

  1. 2

    Leak at sediment bowl

    Thank you!
  2. 2

    Leak at sediment bowl

    HI all, I'm new to working on these tractors, and basically anything mechanical. As a result, I would appreciate a bit of guidance on the sediment bowl valve nut. I wasn't able to shut off the fuel to the bowl with the original one, even after taking it apart and cleaning it. So, I bought a...
  3. 2

    Massey Ferguson 1959 oil / filter and knocking

    First off I'd like to thank all of you for your thoughts and comments. It's very much appreciated! In trying to keep hope a fix is possible without dropping the pan, etc. I changed the oil and filter, put in 15-40 oil, and also added some Seafoam to the oil. Started it up to hear a very slight...
  4. 2

    Massey Ferguson 1959 oil / filter and knocking

    Thank you! I don't use it during the winter months so its not run at low outdoor temps. I use it for mowing pastures from spring to fall.
  5. 2

    Massey Ferguson 1959 oil / filter and knocking

    I had a mechanic come out who listened to it. His thought was a rod causing it. Again, rebuilding the motor, something I'm not comfortable with both because of my lack of skill and its expense, is a path I'd prefer to not take if I can go another way. I use the tractor to run a brush hog to mow...
  6. 2

    Massey Ferguson 1959 oil / filter and knocking

    This message is a reply to an archived post by 504 on March 07, 2021 at 20:39:25. The original subject was Re: Massey Ferguson 1959 oil filter. I have a question in regard to the sludge, gunk. I also have a TO35 gas 4 cyl tractor that's recently started to knock after running a bit. A friend...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top