Recent content by 720diesel

  1. 7

    Ramsey Illinois Lions Club Tractor Pull

    Ramsey Lions Club Tractor Pull Saturday June 9th, at Lions Park in Ramsey Illinois. Beginning at 9 AM having antiques, farm stock tractors, and semi trucks. For more information you can send an email to [email protected] There is a downloadable flyer at the link. Ramsey Lions Club...
  2. 7

    Ramsey Lions Club Tractor Pull

    Bump, less than a month away!
  3. 7

    Ramsey Lions Club Tractor Pull

    Yes that is correct, payback will be 100% if there are 10 or more tractors in a class.
  4. 7

    Ramsey Lions Club Tractor Pull

    Ramsey Lions Club Tractor Pull Saturday June 9th, at Lions Park in Ramsey Illinois. Beginning at 9 AM having antiques, farm stock tractors, and semi trucks. For more information you can send an email to [email protected] or call Larry Miller at 618-292-5947.
  5. 7

    O/T: '97 Dodge/Cummins front seal

    Pull the front cover off and tab the dowel pin while your at it. If you don't, you are wasting your time. Just tabbed my killer dowel pin and fixed the front seal last weekend, not too hard, probably 4-5 hours working at an easy pace. This gives instructions on fixing the dowel pin and at the...
  6. 7

    IH truck engine.

    We pulled apart an IH truck engine.We thought it was a dt466. I could swear to it being a 400 series big lifter block, but the stamp number on the side starts with 36?, so I dont know. Some parts look relevant to 400 series, some parts look slightly different. Any idea what I have? Thanks!
  7. 7

    466 engine

    Does an 88-92 truck 466 have fire ringed sleeves in it? Thanks!
  8. 7

    66 series differences.

    Is there any differences in the strength of gears, shafts and everything else in the transmissions from the 966,1066, and 1466? What, if any, parts are interchangeable? Are the axle sizes all the same? We are looking at a 966 farm puller and want the strongest transmission possible. It already...
  9. 7

    central illinois pulling rules

    I need a copy of rules sent to me or posted for the Shumway, Altamont, Olney, Montrose, T-Town, Sigel, etc, area brush tractor pulling events. Thank you.
  10. 7

    John Deere hydraulic cylinders.

    I need parts diagrams and parts lists for the following cylinders. You could post them here or email them to me at [email protected] A3162R A4720R A3182R Thanks!
  11. 7

    JD hydraulic cylinders

    I need parts diagrams and parts lists for the following cylinders. You could post them here or email them to me at [email protected] A3162R A4720R A3182R Thanks!
  12. 7

    OT - National FFA convention travel tours

    You might take them to the Indy zoo and the race track while you're there. Just a thought. We never went there but I know groups that did. Just a reminder get your hotel booked now. Chances are there are probably some that are already booked. I imagine by september all rooms will be sold...
  13. 7

    John Deere 9600

    We have an older 9600 John Deere with a 2 position throttle switch. We would like to go to a 3 position switch like the newer 9600"s or a poteniometer where you can adjust the throttle on a dial. What has to be done to accoplish either of them. Is it a solenoid at the pump or is it different...
  14. 7

    wet sanding

    I am about to buy a dodge diesel truck. The guy had it repainted and the guy that did it screwed him over. The paint is kinda on the poor side. It has been about 6 months since it was painted. I was wondering if I lightly wet sanded it, if it would improve its appearance? Does anybody have any...
  15. 7

    john deere b

    I need the torque for the block, head, and connecting rods. I also need the clearances for the rod bearings.The tractor is a 1948 John Deere B. Thanks!
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top