(800) 853-2651
SHOP NOW

Recent content by 770jdman

Yesterday's Tractor Forums
  1. 7

    Super 55 shifter

    Been working on super55. Had a few minor things left. I tried it out on the bush hog before i put it up. Everything worked fine. Well of course i put in the corner for to long and used other tractors. Went to move it around and now the shifter will not go in any gear and it's stuck in the upper...
  2. 7

    TO 30 troubles

    If the tractor was in a cold area check the block between the cylinders. They were notorius for cracking there. We junked alot of ferguson 20 and 30 from the blocks being frozen. By the way none were ever pushed out the side. Had one in ffa boy that's been awhile, same problem. They...
  3. 7

    plasma torch recommendations

    I have a klutch 375 and it does great for the price. Cuts great for 3/8 nice and smooth. Had it for 2 years and still works great and good customet service.
  4. 7

    Questions about UDLX's

    There not the only tractor that would run that fast. We traded in several row crop silver kings. Back in the 90s my dad traded on one. Instead of getting the rollback he just drove it home about 20 miles. It topped out 40mph. The other one we had was around 37. What an experience. One wheel in...
  5. 7

    Hough ha payloader starter

    Need a little troubleshooting. Bought a really good condition ha payloader. Has original 6v system. Don't really want to change that. Been around 6v for years.if there right they start fine. On this it barely turns it over. Had the starter rebuilt and cleaned all surfaces for good ground. All...
  6. 7

    TO-30 missing

    Since it seems to die running rich. See if you can pull the plugs and see which one is rich. Not likely a fuel problem. It seems to be a firing issue. Could be plugs. Had plugs when they fired after a minute or two they would short out. Had new ones do this. Could be condensor or coil. Had...
  7. 7

    MM bg1

    Not familiar with this model bg1. Tag missing. Not running but the tractor complete and in nice shape. Has 3 point and pto. Is this unit worth fixing or should just part it out
  8. 7

    Klutch Welder - Would like your Input

    This message is a reply to an archived post by RTR on February 03, 2015 at 12:54:10. The original subject was "Klutch Welder Would like your Input". Know this an old post,but this may help someone. As a welder using different welders and owning miller's and Lincoln. I bought a klutch 220si...
  9. 7

    the agony continues

    Good advice. Try a new set of points and condenser. Maybe the coil is going bad also. Had one do that. But about 33 yrs ago we traded one in. Started great and run a few minutes. Just kept getting worse. Tried everything. The distibutor grounded out. Drop another one in and run great
  10. 7

    followed me home

    Already have a few different starters for that engine. Actually have a whole engine for it if I want to do that. I pulled the grill screen out and it was in pristine condition. There was some parts I was going to use off of it but the overall condition is just good to do with this one. It...
  11. 7

    followed me home

    In Nc near charlotte
  12. 7

    followed me home

    A BG followed me home today. The serial tag is gone. The tractor is complete even has 3 point and no welds. I'm not a mm fan even though they made good tractors. Just wondering if I should work on it or if someone needs a project or a parts tactor.
  13. 7

    what to use for sweet corn picker?

    Try to find a snapper that is a picker with no busking bed. They were available in about every brand back in the day. Works great on sweet corn
  14. 7

    OC-46 Head Gasket

    Olson's had them about 1/2 what Zimmerman was
  15. 7

    Square Baler Capacity vs Stackers on the Rack

    When I grew up it would take 2 men on the wagon to keep up with a new Holland 268 baler. Then we got the 273 with thrower and about 8 bale wagons. Sometimes tough to the bales off that way.
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top