Recent content by Ajwash

  1. A

    oil pressure question

    So should I be concerned with the gauge being maxed out or is this normal? Gas engine by the way.
  2. A

    oil pressure question

    I have a 1961 ford 4000 industrial loader backhoe, what should the oil pressure gauge read? right now with a warm engine the gauge reads around 30 at idle and when throttled up with no load the gauge maxes out at 80.
  3. A

    Help identifying tractor

    So the 80 psi on the gauge is OK, I thought mabe was a little high?
  4. A

    Help identifying tractor

    another newbie question.... I changed the oil on the tractor and replaced the filter and used sae 20w oil (per my father inlaws advice). after changing the oil i noticed the oil pressure shot up to 80 psi on the gauge. is this normal or do i need to use different oil. and what is the normal oil...
  5. A

    Help identifying tractor

    Yes the pump is shot, has a crack right through the center section. It's a Cessna pump mounted to the front. I am trying to find a replacement but am haveing a hard time matching up numbers, any suggestion on where I might find one? Haven't had a chance to look local yet
  6. A

    Help identifying tractor

    Thanks for the quick response, the front hydraulic pump is what is no good.I am also not familiar with this tractor, is there another pump somewhere??
  7. A

    Help identifying tractor

    So i just picked up a ford industrial loader backhoe. person i got it from said it was a 1963 ford 4000. after doing some research i am getting conflicting info. code on the gas engine near the starter is 40303S and the serial # is 137289. any help would be helpful. i need to replace the...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top