Recent content by Andy4020

  1. A

    4010 Block drain cock

    The drain valve is brass, if it has a pipe plug in the block it is steel. To get the drain valve out, you break off the "wing nut" and use a 6 point socket.
  2. A

    MF65 Backfireing HELP!!!!! VIDEO

    try another new condensor, I have been having bad luck with the new ones you get, I havent found a good one yet. I usually end up putting in electronic ignition.
  3. A

    Farmall decals

    I am looking for a good set of decals for a Farmall B. I want computer cut instead of printed on vinyl. I know Jorde"s decals do for John Deere, but I don"t know about Farmall. If anybody knows of anything, let me know.
  4. A

    John Deere 2440 left brake locks up

    there is a small oil line from the brake valve to the left brake that runs under the tractor. make sure the line isn't pinched shut, I had it happen to me once on a 2640
  5. A

    4020 3 pt hitch

    check the adjustment of the cable that goes from the lever to the valve there is 2 holes on the end of the cable that you can hook the valve lever under the seat, if its is a side counsel model you can adjust some linkages to make sure it raises all the way
  6. A

    will wheel weights from a 720 fit a 4020?

    we use our weights on our 730, 4010, 4020, and 4230. they all come off of the same pile in fall for field work and come off before tractor pulling season
  7. A

    fuel pump on 8300

    It either has a Bosch pump or Nippendenso, Im pretty sure is has a Bosch. Your best bet on more power is going to your fuel injection shop and tell them what you have and what you want, they can get you a "black box" that plugs into the wiring harness at the pump it will make the engine a lot...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top