Recent content by Antgre

  1. A

    Can a Farmall H handle a 3 bottom plow?

    Wow. Thanks for the replies. My first job was working on a farm from about 13 to 16 years old. I did all kinds of odd jobs you would expect a teenager to do. Stacking hay, feeding cows/pigs/chickens, milking, shoveling silage, helped deliver a calf once. I also shuttled hay wagons with a JD...
  2. A

    Can a Farmall H handle a 3 bottom plow?

    Thanks. Do you know how many row cultivator? I've heard anywhere from 2 to 6.
  3. A

    super C- restore or not

    Another vote to restore it. Parts seem to be plentiful on the internet. I would at the very least take an inventory of everything you need. Then search the internet(eBay/craigslist/this website/caseih.com)for parts/prices and see if it is worth it to you.
  4. A

    Farmall H Battery Installed backwards

    Thanks to everyone who posted in this thread. With your help my tractor is clearing snow again. I also found an excerpt from a 9N repair manual by Clymer on the internet. It explained how to adjust the opening and closing voltages of the cut out. I widened the gap between contact points...
  5. A

    Loader for farmall H

    I got my H with a Schwartz trip loader on it. I have been using it to clear snow and it works pretty well. One feature I really like is it has a crank to adjust the pitch of the bucket. I don't know if they all have that. Mine doesn't have live hydraulics which is the worst part of the...
  6. A

    Farmall H Battery Installed backwards

    When I disconnected the BAT terminal on the cut out switch the drain went away. I took the cover off and tapped on the contact a few times and when I put it all back together there was still no discharge. So it looks to me like a sticky relay. When I looked for the cut out on CaseIH.com I...
  7. A

    NO MORE EBAY..

    I can't find any Farmall's on Kijiji.
  8. A

    Farmall H Battery Installed backwards

    I disconnected the wire from the BAT terminal and connected the battery with positive ground. When I touched the wire back on the BAT terminal there was no spark so I screwed it in. I then momentarily shorted the GEN terminal to the BAT terminal and got my little fireworks show. I started...
  9. A

    Farmall H Battery Installed backwards

    So while I'm waiting for the battery to charge I traced out all the wiring. It is identical to farmallbob's wiring diagram shown here at the attached link except the battery wired + to starter switch and - to chassis. Also the remote starter switch of course. I also noted a splice in the wire...
  10. A

    Farmall H Battery Installed backwards

    The previous owner told me the battery and 1 gauge cables to the switch and starter were brand new. They look like it too. There is no crud to clean off of them. The ammeter moves just slightly to the right when the switch is in the high charge position but I'm only reading 5.95 volts at the...
  11. A

    Farmall H Battery Installed backwards

    I bought a Farmall H a week ago and have been using it to clear snow. When it wouldn"t start I noticed the battery was not taking a charge. It appears to have the original 6 volt system. Then I noticed the positive terminal of the battery is going up to the starter switch and negative going...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top