Recent content by BackBay

  1. B

    Farmall C charging system will not work

    I ran into the same problem with my Super A. Had the gen rebuilt and still no charging. Checked all the wiring per the procedure above...still not charging. My thought was when the gen repair shop tests the gen they probably spin it faster than the 1500 max RPM the engine turns. So I took off...
  2. B

    Sq. Head Bolt Grade

    The orginial bolts were deformed so whatever strength they were was not sufficient. Although, after 58 years, I may be deformed a bit too.
  3. B

    Sq. Head Bolt Grade

    I went to www.fastenal.com to order new squarehead bolts for the front and rear rims of a SA. What grade of bolt is required? The choices were: 2, 5, 8, A, and A307A.
  4. B

    Super A rod bearings

    Thanks for the reply. The bearings are also Clevite and I verified the correct part number so I will install them and hope for the best.
  5. B

    Super A rod bearings

    I am restoring a 1950 Super A. The main bearings I received from TISCO match the IH bearings removed from the engine, but the rod bearings were 1/4inch narrower. The IH rod bearings were 1-1/4 inch wide and the TISCO bearings are only 1 inch wide. I verified that they sent me the correct part...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top