Recent content by backwater

  1. B

    Metal in bottom of H transmission

    Funny you should say that, I started cleaning the inside of the trans really good with a pump up sprayer with kerosene and managed to break up all the sticky goop that was keeping the axle bearing quiet. The bearings are still in place but the race has broken up. Do I need to remove the wheel...
  2. B

    Metal in bottom of H transmission

    Changing the oil for the transmission I removed metal pieces that seemed to be from a bearing race but after removing the trans top I was not able to find anything out of sorts and the 4 bearings I could see looked to be intacked. There isn't any noticeable noise in trans and it seems to work...
  3. B

    51 H Transmission Metal Chunks

    Got the top off (Broke 2 seized bolts) and couldnt find any obvious broken bearing races or gears. How many bearings are there in the trans and is there anything in particular I should be looking for?
  4. B

    51 H Transmission Metal Chunks

    I finally was able to get the top off to see if there was any damage (Broke 2 seized bolts) and couldnt find any obvious broken bearing races or gears. With that being said how many bearings are there in the trans and what should I be looking for?
  5. B

    51 H Transmission Metal Chunks

    I will post a picture. After cleaning them up I can definitely see the shape of a bearing casing but have not found any round bearings so far. Just about to dive into removing the top cover.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top