Recent content by bbbuddy

  1. B

    super m pressure plate fingers

    Jim, we got an email from a guy that has a new set of fingers! I asked him if the fingers have an adjustment bolt at the ends like ours does. If these new fingers do not have the adjustment bolts, can they still be used, or are they just for another type of pressure plate? I have not yet heard...
  2. B

    super m pressure plate fingers

    So, if we put the old clutch plate back in, it ought to be ok? The old plate was not slipping and according to a tractor place that we emailed the thickness to had plenty of life left in it...
  3. B

    super m pressure plate fingers

    No, just put a new clutch plate in...
  4. B

    super m pressure plate fingers

    Odd that it would "be toast" now since it was working fine till we split the tractor? We experienced zero clutch problems when running it. You would think it would have slipped or something... So, no way of just replacing fingers?
  5. B

    super m pressure plate fingers

    Last fall my hubby split the tractor because it seemed to be stuck in gear. Turned out it was just the shifter stuck, we got a Sloppy Shifter kit from ebay which fixed it. Thanks to those of you that suggested it! SO...DH figured as long as he had the tractor split, why not put a new clutch...
  6. B

    how to get a pin out of shifter /housing

    Well the plug was steel (or maybe lead? ) and he got it out, the pin came right out, the shifter was so gunked up he thought there was rubber in there. He had to scrape it off all over the lower part of the shift lever and the swivel pin and when he put the lever back down into the tranny...
  7. B

    how to get a pin out of shifter /housing

    Apparently there were no plugs on either side of the raised housing, so the pin must be rusted in there. He just needs to beat on it (the pin) more I guess... --------------------- Ok, I went out with a flashlight to get a good look, and it just looks like the end of a steel pin recessed into...
  8. B

    how to get a pin out of shifter /housing

    We are trying to get the big pin out of the gear shifter housing on a Super M. Put Kroil on it to soak for a while. Beat on it with a sledge hammer...husband is afraid to beat on it too hard so as not to break the cast raised "housing" that the lever goes into. The lever seems to be a two...
  9. B

    Super M clutch or tranny problem?

    No, I'm saying that he down shifted into 1st, then when he pushed the clutch in to up shift, it kept running forward, AND the gear shift lever would not move...so he just shut it down.
  10. B

    Super M clutch or tranny problem?

    Yeah, I meant "it's very difficult" to start when in gear because of bucking or dying unless the rpm's are way way up... I searched for stuck in gear before I asked my question and saw all those posts, lol. Thought this might be different because of clutch not disengaging the gear...
  11. B

    Super M clutch or tranny problem?

    Husband says to tell you he agrees, should have asked me first, lol. A search on ebay for welsh plugs turns up no repair thingy for tractors, any idea what to search for? Thanks!
  12. B

    Super M clutch or tranny problem?

    ok, how would he know this? The 3 fingers all were retracted on the pressure plate when he pulled it apart...they all look the same, and the wear on the throwout bearing looks even. The only other thing I know is he thinks the clutch pads looks fairly worn (maybe down to 1/16 inch), and wants...
  13. B

    Super M clutch or tranny problem?

    I appreciate both replies. I need to add that the tractor was stuck in 1st, even with the clutch pushed in. When he turned it off, he couldn't restart it because pushing in the clutch didn't disengage the gears, and as you know you can't start a vehicle while in gear... Does this change...
  14. B

    Super M clutch or tranny problem?

    Hi, my husband's Super M is stuck in 1st gear, he down shifted, and then couldn't get it out of gear. He split the tractor hoping it was the clutch, but even when split, the gear shifter won't move. Does this mean it's the tranny rather than the clutch? The clutch "looks fine", throw-out...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top