Recent content by BELIZE91

  1. J

    Tool with a little meaning

    One of the tool shop guys was retiring, the guys wanted to make a little something for him. My son drew it up for the guys and I made the burley walnut base and son put together all together.
  2. B

    What are sources of water in the oil BD154 B414 diesel?

    what is the tool or trick to remove the sleeves? it it resonable to put new sleeves and seals and reuse the old pistons, rings and bearings if they are ok? I have to do this in the loader
  3. B

    What are sources of water in the oil BD154 B414 diesel?

    So does the sleeve crack or is it the o-ring? Is there anywhat to confirm the block is not cracked? I have not worked on an engine like this before, I assume drop the pan, pull the head again and remove the sleeves, what is the tool or trick to get them out?
  4. B

    What are sources of water in the oil BD154 B414 diesel?

    I have a BD154 like what is used in a B414 in a 3444 payloader. Before pulling the head I noticed antifreeze in the oil, I drained it. Thinking the head was cracked and finding the exhaust valves were badly rusted I replaced the cylinder head. I now find antifreeze in the oil again after...
  5. B

    BD154

    Just bought a 3444 IH with a BD154 diesel. I pulled the dipstick and antifreeze flowed out the tube. The tractor was sitting for 5 years, and ran when parked. I am trying to determine what is broken so I unbolted the first fuel injector and I can not pull it from the head. I want to add water...
  6. B

    International 3444 backhoe

    This message is a reply to an archived post by Robert in MI on September 13, 2009 at 21:13:37. The original subject was "International 3444 backhoe". I bought one of these 3444 (i Think) how does the hood over the engine open up?
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top