Recent content by Ben Da Hater

  1. B

    1942 9n crank no start

    Spark plugs did it, started right up after I installed the new plugs. Thank you for the help with trying to figure out this issue. Im glad I got this resolved.
  2. B

    1942 9n crank no start

    Correct new points as well. Before I did most of the work it ran really bad, wouldnt even make it into 3rd low and could do any gears in high. The exhaust was popping a lot and also the oil pressure would drop as the oil got warmer. It had very bad misfires and carb was way out of adjustment...
  3. B

    1942 9n crank no start

    Havent put new plugs in it yet, but I was able to do a compression test. Going in order from cylinder one the numbers went like this: 75 psi, 60 psi, 85 psi, 60 psi. I would assume that it should still fire with these numbers.
  4. B

    1942 9n crank no start

    Yes all 4 will spark a 1/4 gap, not as strong of a spark as like 1/8 but all 4 spark with a 1/4 gap.
  5. B

    1942 9n crank no start

    I took all spark plugs out, none soaked with oil, looked like maybe a little in the treads of it. None on the end of the plugs. I did feel compression on all 4. While cranking with the plugs out it cranked much faster than normal.
  6. B

    1942 9n crank no start

    I have a 1942 9n that died on me doing yard work. It has a month old brand new carburetor and all new plugs, cap, rotor, and condenser. All 4 plugs have good spark. The engine is getting a steady amount of fuel and air. I got it to start for a quick second and it was spewing oil out of the...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top