Recent content by berniepoh

  1. B

    Need 1 new piston and rings for 3 1/4" bore TO-20

    Thanks for the help!
  2. B

    Need 1 new piston and rings for 3 1/4" bore TO-20

    Where can I buy a single piston and rings for my to-20? Tore my to-20 apart to find out why #3 cylinder wasn't firing. Found a broken piston. No scarring, no other visible issues. Fatigue, I guess? The piston has Z120A405 stamped on top. The bore is 3 1/4" as best I can tell. Thanks for...
  3. B

    TO-20 Generator Pulley

    I took my 6v generator to a shop that has been in business for 50+ years. They fixed the generator but could not help me with the bent pulley. I had to straigten it out using a piece of pipe and "tapping and rotating" until it looked really good. Good luck.
  4. B

    Ferguson 40

    The owner sure put a good spin to his fergy 40! I think $500 would be a fair price, honestly.
  5. B

    Is priming the hydraulic pump necessary?

    I just put a "dry" pump in my rear end and had no problems. The pump started working right away.Good luck.
  6. B

    Lake Loramie Fall Festival and Antique Power Show

    It was red when I bought it 30 years ago. I've been told that when Ferguson became Massey Ferguson, some dealers painted parts of it red to be more like the Massey Ferguson paint scheme. My boys used MF red to repaint 10 years ago. All Fergusons were grey from the factory.
  7. B

    Lake Loramie Fall Festival and Antique Power Show

    For anyone interested, The Lake Loramie Fall Festival and Antique Power Show is being held, THIS WEEKEND, at Lake Loramie State Park in West Central Ohio. I have my TO-20 on display and saw at least another 1/2 dozen Fergys as well. Lots of things to do and see. The park is located just east of...
  8. B

    Swapping ferguson TO-20 and Ford parts

    Can anyone tell me if an 8N complete hydraulic pump would bolt in to a TO-20 tractor?
  9. B

    TO20 lift quit working

    Talked to you a couple of weeks ago. I have taken the pump out of my TO-20 tractor with the sawed off shaft still stuck in it. I have damaged the pump and the shaft still doesn't want to come out. Do you have an entire pump like the picture on August 18th that you want to sell? Thanks for the reply
  10. B

    trans ,hdy,rear end

    I have been told to use 15W-30 and it takes 6 gallons for the hydraulic area.
  11. B

    PTO shaft on T0-20 stuck in hyd pump

    Thanks for the feedback. I'm always looking for the easy way out, but I kinda thought this was the answer I would get.
  12. B

    PTO shaft on T0-20 stuck in hyd pump

    I've got a twisted shaft stuck in the pump. I was able to use an axle puller and bring it out 2" and no more. After reading all the posts I have opened up the tractor and cut off the pto shaft. Still not able to remove the shaft from the pump area. I want to drop the entire pump from the bottom...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top