Recent content by Betta7776

  1. Betta7776

    1946 CASE VAI Head Gasket

    In car engines I have heard that putting ATF into the pistons and letting them sit for a while could help loosen the rings back up, is this something that would be worth trying? Or if it is stuck rings should I just rely on a few heat cycles to free them up? Also just to confirm my...
  2. Betta7776

    1946 CASE VAI Head Gasket

    If water was leaking in would it show with a lower level of water in the radiator? Or is the amount probably too small to be noticeable by fluid level? The radiator has been full since I got the tractor with no sign of it being any lower now.
  3. Betta7776

    1946 CASE VAI Head Gasket

    I have one that I use for my car, is it the same mentality where the PSI reading doesnt matter as much as having all of them close to the same reading? Or what reading would be considered "Bad"?
  4. Betta7776

    1946 CASE VAI Head Gasket

    Financing the repairs on this tractor is something that I am going to need to be extremely careful about, and am trying to just focus on one thing at a time. What would I fill with water? the pistons themselves? or do you just mean fill the radiator with water and see if any drips while the oil...
  5. Betta7776

    1946 CASE VAI Head Gasket

    Awesome thank you for the information! I've had the tractor for about two months. It sat for about 10 years then I got it going back in August. The oil pressure gauge never showed more than 0 psi, I had assumed the gauge was busted as there was 0 noise coming from the engine, which made me...
  6. Betta7776

    1946 CASE VAI Head Gasket

    Here is a video for reference just in case I am looking at it incorrectly. I am extremely new with restoring machines, but am fully willing to learn and experiment with anything and everything. Any assistance would be appreciated!
  7. Betta7776

    1946 CASE VAI Head Gasket

    I have a 1946 CASE VAI that has started spewing blue smoke ever since I did an oil change on it (was not getting any oil pressure before oil change). The oil itself looked awful when I pulled the plug, and is what I assume would be considered "Milky". With this in mind I assume I will need a new...
  8. Betta7776

    Trying to figure out head gaskets

    Trying to figure out head gaskets
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top