(800) 853-2651
SHOP NOW

Recent content by BFain

  1. B

    Long 610 hydraulic fill level

    I need to make sure that the hydraulic oil is full on our Long 610 but I also don't want to overfill it and take a chance on blowing any seals and having to replace them. The manual, as well as some posts I've read online say to "fill to the top mark." The top mark on our dipstick says "DT,"...
  2. B

    MF 37 Side Delivery Rake

    I need to replace the drive chains on my MF 37 rake that broke on the left side. Does anyone know what size the chain is? From looking at it, I'm guessing it's 2040 or 2050 but not sure. I was planning just to buy a roll of it at TSC, along with a couple of master links, and just replace both...
  3. B

    Long 610

    We're about to pick up a Long 610 tomorrow that we traded for recently. It's going to have to have some work done on it. My brother-in-law used to manage a parts counter for a dealer that handled Long tractors several years ago. He was saying that the Long and the Farmtrac are the same...
  4. B

    case 1190 power steering problems

    We were having problems with the power steering on our 1190 blowing fluid out the overflow. After changing the filter and fluid (back to TCH), we still had problems. So, we had the powerr steering pump and the steering cylinder rebuilt. We are still having trouble with the steering being stiff...
  5. B

    NH 848 round baler (keeping bar chains oiled)

    What kind of oil should we be using in this NH 848 baler we bought to keep the chains driving the bars oiled? I've had a guy at one NH dealer tell me burned cylinder oil is okay. Will it still stick to the chains to keep the links lubed enough to prevent wear or should we look at buying a 5...
  6. B

    NH 848 baler

    The reverse belt on our 848 was slipping, because they were worn heavily. We replaced the drive belts and the reverse belt with one that came from A&I Products out of NC. The new drive belt from them is a single piece, instead of three separate belts. So, it won"t ride down as far in the...
  7. B

    Tecumseh/Peerless transaxle problems

    Actually, it turned out to be the shifting keys. Once we dropped it back out and changed those, it works great. There was just enough wear on them that it was allowing the gears to slip over the end of the keys. The reverse chain was still in good shape with no noticeable wear on the reverse...
  8. B

    New Holland 848 Round Baler

    Anyone know where I can find a parts manual online for a New Holland 848 round baler where I can look up some replacement parts to get their numbers?
See more
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top