Recent content by bgpeterson

  1. B

    John Deere B bearing source?

    Thanks for your help! I will call around today to see if I can get these bearings.
  2. B

    John Deere B bearing source?

    I just realized I had the serial number wrong so I was referencing the wrong bearing numbers... For my tractor, it looks like the bearing I need the most is [b:10662c107e]JD 7973 R[/b:10662c107e] and the snap ring [b:10662c107e]B 2437 R[/b:10662c107e]. This bearing completely fell apart in...
  3. B

    John Deere B bearing source?

    Thanks for the link to the part #'s! It looks like I will need the bearing part numbers below: JD 7190 R JD 7678 R JD 7928 R JD 7677 R I will also need to replace the snap ring that broke when I took this apart which is part B 1876 R. Do these bearings have Timken numbers? Thanks again!
  4. B

    John Deere B bearing source?

    I'm looking for a good source for bearings on a John Deere B tractor transmission. I'm looking to replace all 4 bearings on the sliding gear shaft if I can find them. Are these available still in production? Thanks!
  5. B

    John Deere B no reverse

    I ended up putting the tractor back together again because I needed to use it for some projects. At first, it acted the same and didnt want to go into reverse but after a little persuasion, it decided to go into reverse gear. I did a few projects and now it seems to slide into reverse again...
  6. B

    John Deere B no reverse

    When i grab the differential gear through the transmission top under the steering post, everything feels tight. If a bearing was going out, wouldnt I be able to move something with a pry bar? Thanks again for the help!
  7. B

    John Deere B no reverse

    The shifting fork seems to work but when the reverse gear meets the drive gear, the sprocket teeth hit slightly preventing them from engaging. It's almost like the reverse gear is too large so it wont slide into place.
  8. B

    John Deere B no reverse

    Hoping someone can help me figure this one out... My Deere B slowly quit shifting into reverse. We took the transmission apart and removed the flywheel side. It really seems like the reverse gear is very slightly too big to slide onto the drive gear. All the shafts feel tight so I dont think...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top