Recent content by bicklebok

  1. B

    Case 311 charging system

    Joe, thank you so much for the information! You always come through when I have a question! Looking at the ammeter posts, they look like they make contact with the back of the cluster to my old eyes, but I know that can be the case. Im going to use your trick and add a plumbing washer to be...
  2. B

    Case 311 charging system

    Thank you for the help gentleman! I will wire it like the diagram Jim posted. I have downloaded several diagrams, but most of them are different in the way they show the regulator connections go. I dont know which one is right. Joe, one of the threaded posts on the back of the ammeter is...
  3. B

    Case 311 charging system

    It's a ford alternator, not a generator. It's an old school Ford style charging system with an external regulator. I already bought a new alternator just like the Ford Alternator that someone else mounted on it years ago when they changed to 12V.
  4. B

    Case 311 charging system

    Hello everyone, I have a Case 311 I have owned for about 5 years now. It was converted to 12V before I bought it but the charging system has never worked. I have finally decided to see if I can get it working over the winter. Here's what I know: It was converted to 12V. It has a...
  5. B

    Need all the prayers we can get

    Prayers for your wife and you!
  6. B

    Case 311 carburetor

    Thank you everyone for the advice and tips. My carb is in pretty bad shape but I ordered a kit for it.
  7. B

    Case 311 carburetor

    Hello everyone, I have a Case 311 with a Marvel TSX 635. I would like to replace the carburetor. Does anyone know of a good source for this carb, or another brand/model that will work? Thanks!
  8. B

    Case 311 front bucket hydraulics

    Wow, you know your hydraulics! That looks like the system I have. Being I have limited knowledge of tractor hydraulics, what would be my first troubleshooting step? Check that the vent release is not blocked? I do remember hydraulic fluid used to squirt out of my cylinder a few years ago...
  9. B

    Case 311 front bucket hydraulics

    I have a 1956 Case 311 thats fitted with a front bucket. When I try to lift the bucket it will raise approximately 4' in the air, then one of the cylinders freezes while the other cylinder continues to try and raise the bucket. This causes the bucket to lift farther on one side and stress the...
  10. B

    New to me Case 311, let the restoration begin

    Congratulations! I also have a 1956 311
  11. B

    Case 1956 311 PTO

    Thank you Barry!
  12. B

    Case 1956 311 PTO

    Thank you for the wonderful explanation Joe. Very helpful!
  13. B

    Case 1956 311 PTO

    It looks more like the 1st pic. The lever is the same. I tried the method of moving the lever toward the right wheel once I pulled it up and it worked. I really need to get an owners manual. It also has a hand clutch but I dont know how to use it. It would be nice if I could use it with...
  14. B

    Case 1956 311 PTO

    I have a service manual, but no owners manual. I never found a manual on line that I was convinced was the right one. I will research that again. I walked outside this morning and checked what you said to do about moving the lever over and it seems like that will do the trick. Thank you...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top