Recent content by bigjohn8229

  1. B

    Electric Wheel Co. Wagon

    Yes Sir. 5 bolt wheel hubs.
  2. B

    Electric Wheel Co. Wagon

    I have an electric wheel co. wagon that I am trying to identify to get any information, especially the capacity. From looking at pictures, I am thinking that it may be a 5005 or 5006-B. I found and old post from 5-13-2007 on the old site but the pictures and manual won’t load. Any help would be...
  3. B

    Semi-Mount Bushhog

    I am contemplating purchasing an 8 foot semi-mount bush hog to replace our current 3pt pick up style. I have a 20+5 gooseneck and the pick up style loads great, but I am curious how a semi-mount would do loading onto a gooseneck trailer. Does anybody have any experience with this? Thanks, John
  4. B

    Massey 255 not charging

    Finally found the problem! The terminal in the weatherproof plug at the alternator for the exciter was broken. The "tang" on the inside of the terminal had cracked and was allowing it to not hold pressure on the male terminal and only make intermittent if no contact. Funny thing- I started...
  5. B

    Massey 255 not charging

    I had the alternator checked at one of the box stores and that is questionable at best. I plan to take it to a local man that specializes in old auto electric components to have him check it as well. A guy at work said that it could be the voltage regulator not allowing it to output the voltage...
  6. B

    Massey 255 not charging

    Anybody? There may not be a problem. I am just not familiar with this particular tractor to know. I have always thought that it should be generating atleast 13 volts.
  7. B

    Massey 255 not charging

    I am helping an older gentleman work on his 255 Massey Ferguson. The voltage at the battery is 12.5-12.6 volts and with the lights turned on drops to around 12.3-12.4 volts. I have had the alternator bench tested and the oil pressure switch tests at least 12 volts on both terminals when the...
  8. B

    M Farmall front wheel bearing

    Yeah I am very familiar with both vendors, but I am not sure of the order in which all of the parts go back together? Both front wheels had been run so long before I bought the tractor it was hard to tell what went where when I tore it down.
  9. B

    M Farmall front wheel bearing

    I have an M Farmall that I am needing to replac the front wheelbearings and seals. I have gotten the correct bearings and race, but when I took it apart it appeared to have a thin metal disk which I assume was a seal some years ago. I went to the local dealer to find this seal and all the showed...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top