Recent content by bigsal

  1. B

    730 water pump

    I"m going to be changing out the waterpump on my 730D in a couple of days. It seems to be a fairly simple procedure, are there any suprises I should look out for?
  2. B

    Pole shed from Menard's

    I designed a three car garage on their computer and they delivered it all at once (one truckload), every thing was as it was supposed to be and went together great, The blueprints were right on and material was good. Saved about 50%. That was twelve yrs. ago an it still looks good.
  3. B

    Not a good week-end

    ET, I appreciate you hanging in there and trying to help me diagnose the problem
  4. B

    Not a good week-end

    No water, no fuel, no antifreeze, just oil and no oil in my hydraulic res. I think it is a seal. I think that is why JD uses 10-20wt oil for the hyd. so that in case of seal leaking it doesn't damage the engine. I'm not sure how big of a job it is to replace that seal. I guess I'll find out.
  5. B

    Not a good week-end

    No, it's oil!
  6. B

    Not a good week-end

    first off my A is trying my patience and then I was going to start my 730D that I haven't used since fall, checked oil and had oil running out of my dipstick tube, drained oi from crankcase and got 4 1/2 gallons. no oil in hydraulics, hope it is just a seal. what do you think?
  7. B

    49 A

    it sounds like some gears are turning without any oil lubricating them
  8. B

    49 A

    The hydraulics are low. It sounds like gears turning and not being lubed. Seems to be coming from somewhere by the flywheel.
  9. B

    49 A

    it does it with the clutch engaged or disengaged both, I greased everything I could find. I pulled cover off of the flywheel and it was tight and no oil leaking, I think I checked the the oil in first reduction, not sure if I was in right place . Ordered a manual but haven't got it yet...
  10. B

    49 A

    I bought an A last fall and just brought it home last week. It runs good and has good power, no smoke, but when it idles it makes a sound like a chain driven unit would make. I have a 730D that I"ve had for 15yrs and I"m pretty familiar with it but this is my first time around an A. Is this...
  11. B

    IH-H carb

    I have a 46H that will only run with the choke about 1/4 of the way open. rebuilt carb and it is still the same. replaced fuel line, cleaned tank, new sediment bowl, still have to have choke open a little. Anybody have any helpfull ideas? Thanks!
  12. B

    504 wfe

    thanks rusty, you saved me a lot of work.
  13. B

    504 wfe

    Can anyone tell me if a factory wfe from a 504 will fit on a m? Thanks in advance for any help.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top