Recent content by Brad Ferries

  1. B

    Rear Axel Housing

    I noticed when I changed the Rear Axel Felts on my model "B" that the Rear End and Transmission housings are actually all one unit. I drained a bucket full of oil and water out. I can see what the full level will be but I don't know if I should put in Gear oil [#-?] or Hydraulic oil.
  2. B

    Rear Axles

    On my model the FELTS are the seals. Thanks for the info on the Axel Nuts.
  3. B

    Rear Axles

    I just replaced thr rear axel seals [felts] on my John Deere Model B and want to know how much I should tighten the big nut on the axel. Should there be any play in the axel at all or should it be snug, It was so loose before I removed it that the cone bearings, on each side, were part way out...
  4. B

    Cooling system part

    I need a Radiator Water Inlet Pipe & Support.That"s the part that's between the upper hose and the upper tank on the Radiator. It has a four hole mounting bracket that the muffler bolts too.The John Deere part number is B 1805 R. It"s for a Styled, Model B, s/n 183786
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top