(800) 853-2651
SHOP NOW

Recent content by brooktre

Yesterday's Tractor Forums
  1. B

    MF 102 loader lift cylinder rebuild help

    Thanks for the responses. That's what I was thinking (weld or brazed), but I didn't want to screw it up if it was threaded.
  2. B

    MF 102 loader lift cylinder rebuild help

    I have an early MF 102 loader on a MF 202 Work Bull. One of the lift cylinders is leaking and it is unclear to me how this cylinder comes apart. I'm pretty sure that cylinder is original (stamped Davis), but it doesn't quite match the parts diagram. The cylinder is leaking from a seam near...
  3. B

    Serial number help

    I would say you have a late 1957 MF 202. Here is what I have put together. Massey Ferguson Model MF-202 Industrial Year Starting Serial # 1957 300793 (x) 1958 301172 1959 303158 1960 305108 1961 306169 1962 306779 1963 307923 1964 309222 1965 310067 1966 311084 (x) 1957 numbers were not...
  4. B

    MF32 Loader (Can't Source Reservoir O-Ring) Gasket Maker Ok to Use?

    The permatex or the Grainger o-ring may work. I've found Wix catalogs online that have listings for gaskets. For my 102 Loader, I found that a 15039 gasket will fit my canister. It is a flat gasket - not an o-ring.
  5. B

    MF 202 Workbull Hydraulics Layout

    I don't have anything handy that shows wiring gauge and I don't know - maybe someone else will answer.
  6. B

    MF 202 Workbull Hydraulics Layout

    Correct on the wiring. Here is another diagram from "Big Dean" that may be clearer. It's hard to get behind the dash. As I recall I loosened the switches once or twice to gain better access behind them, but it is still tight.
  7. B

    MF 202 Workbull Hydraulics Layout

    Most likely the wires to the transmission neutral switch.
  8. B

    MF 202 Workbull Hydraulics Layout

    These should help....
  9. B

    Best Dumpster Find?

    Picked up a Sears (Eska) 3.5 HP outboard motor sitting outside of the trash dumpster. Nothing wrong with it and it still works great. Wife just shook her head. I didn’t have a boat at the time but do now. She would pick up things that interested her.
  10. B

    Need advice on removing mower blades

    Here is what is in my 2007 manual. PS I've never had any luck using the spindle lock wrench.
  11. B

    SCAMMED

    Thanks for posting this. I get these types of emails all of the time. I always ignore them but wondered how the scam worked. Some of the emails I get are probably legit but it’s not worth the time to respond. If I ever leave a review for a product I’ll go directly to the web site where it...
  12. B

    MF202 brake problem

    Thanks for the update. Adjusting the brakes is on my list of things to do. I have a MF 202 with a loader and a backhoe. With just the loader on, the brakes are OK, but seem like they could be better. When both the loader and backhoe are on my 202 I really have to stand on them to stop with...
  13. B

    MF202 brake problem

    The service manual mentions to verify that there is no grease or oil inside the brake drum when reassembling. I would readjust the brakes per the service and owners manuals. If you still have weak brakes, you may want to pull the drums to verify that there is no grease or oil contamination...
  14. B

    MF65 Paint Colors

    Massey paint files
  15. B

    Part it;keep or sell it?

    Delta - I also lost my wife of 40 years earlier this year. It is tough, but slowly getting better for me. Hopefully it will soon get better for you also. I have heard that when you lose your spouse , it is best to wait a year before you make any major decisions. I don t know where the...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top