Recent content by Brozum01

  1. B

    Commercial use flail or rotary advise?

    Yes 45hp engine. I'm aware of the limits of my pto hp and technically 6ft rotary is about max. Traveling 5-6 mph is only when the rpms are not dropping, motor isn't bogging and it's still cutting clean. I've actually mowed 6-8 ft weeds at 3-4mph without motor bogging, rpms dropping and...
  2. B

    Commercial use flail or rotary advise?

    Also depends on the pattern. I just do circles around the property. I've seen a lot people brush hog like they are on a zero turn with a back and forth pattern. That means the mower spends less time cutting and tractor spends more time changing direction of mow. If the blades aren't cutting then...
  3. B

    Commercial use flail or rotary advise?

    Depending on the terrain it cuts 2 ft grass and weeds pretty clean in medium range with the pedal almost to the floor 5-6mph without working the tractor or egt temps getting too high. I was wondering if I could get a clean cut with the flail at that speed
  4. B

    Commercial use flail or rotary advise?

    Thank you guys! These properties don't have much risk of damage from debris. Sounds like I'll continue to use the rotary. Just wish I had a deck over trailer so I could get wider than 6 ft on the trailer
  5. B

    Commercial use flail or rotary advise?

    I run a small brush hogging business. I have a woods 6ft rotary and an Alamo shd74 flail. A 45hp tractor. I have a couple larger commercial accounts 30 acres. In the past Ive always used my rotary for these. Which would be best for me fuel and travel speed wise. With the rotary I can...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top