(800) 853-2651
SHOP NOW

Recent content by bugspot

Yesterday's Tractor Forums
  1. B

    400 rockers lever oilers

    How does oil get to the valve spring side? The lifters are getting plenty of oil from the journals and canals on top of the levers. On the spring side it"s stays dry. Should I run it longer or are there journals in the valve side of the lever that may be clogged that I can"t see? Thanks ...Tim
  2. B

    Here's that site

    http://www.permatex.com/
  3. B

    Good site for sealant choices

    I chose the recommended sealant and activator that this company offers and I picked one that worked great. I like the way it set up,durable. Go on site and find automotive and then tread sealants. There's all others too. This is not an add. Just a little back to you guys for all your help. ...Tim
  4. B

    400 side cover removal

    Is there a way to cheat when I replace the side cover gasket on distributor side? Can I take the whole dist./hydro pump off as one? The front bolt won"t come out. It hits the pump. ...Thanks Tim
  5. B

    400 head studs

    Do head stud treads need to be sealed at the block? Also When I threaded them in all the way some were just a bit too short. Can you have some threads showing at block? ...Tim
  6. B

    400 head gasket question

    Did you coat both sides ? ...Tim
  7. B

    400 head gasket question

    Are you saying you used copper spray on the new style too or not ? ...Tim
  8. B

    400 head gasket question

    I openned my full gasket set i got from this site. The head gasket is not the metal with copper crush rings on the water ports. It's a victor with metal on bottom and gasket material on top. The bottom has some kind of protector sprayed on it. On the top right near where is says UP, it also says...
  9. B

    400 piston rod twisted - follow up

    Also, I was assuming because I saw in the manual briefly as I paged through, they showed an engine man checking for twist in a piston rod. ...Tim
  10. B

    400 piston rod twisted - follow up

    In my first post on this topic I stated that the piston was twisted. I now realize that I should have stated that the piston looks to be turned by the looks of the position of the top cast. Sorry for any confusion. Good thing I"m a Truck mechanic and not an author. ...Tim
  11. B

    400 piston rod twisted - follow up

    Thank You Jim, I pulled the pan and happy to looks good. Like a 2x4 If you have to look twice it's straight. Good thing when I pulled the pan I had thick sludge only in the bottom of the pan, and the sump was mostly clogged with it too. The block looks good, I checked for any other play on...
  12. B

    400 piston rod twisted

    I"ll probably do that Mon. Cross Fingers! Thanks ...Tim
  13. B

    400 piston rod twisted

    Yes!I do that. Thank You ...T
  14. B

    400 piston rod twisted

    Well it"s gonna have to sit and wait. Thanks guys .....Tim
  15. B

    400 piston rod twisted

    I need some expert advise on my c-264. The very front piston is twisted about an 1/8 inch counter- clockwise. It needed a head gasket that"s when I saw this. It"s a step piston. It"s not hitting the head now. I"m not ready yet to afford an overhaul. Am I looking at a major problem if I just...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top