Recent content by burnt-smta

  1. B

    460 hyd and pwr steering problems

    Thank you roger I will look into this some more
  2. B

    460 hyd and pwr steering problems

    The 460 I'm working on has great hydralics and power steering as long as the front of the tractor is sitting down hill however when the tractor sits level both steering and hydralics are poor and sounds like the pump cavitates when raising the fast hitch or operating any of the leavers. It is...
  3. B

    D301 in 560, oil bypass port ???

    When i did this to my 560 I used the tractor filter base and left the relief valve in the block, I then figured out were the filter base was up against the valve and had the base machined out to clear the relief valve. Not sure if this is the best way but its been the way close to 7 years and...
  4. B

    460 governer

    Gas sorry forgot to mention that
  5. B

    460 governer

    I'm working on a 460 that seams to have no governer response at all. At just over an idle it will also slowly increase rpms on its own . Not sure what to do to fix these problems, anyone have any suggestions?
  6. B

    460 head

    I have a friend with a 460 gas and he needs a head, I have a good one off a 756 gas which had a 291 will that head work OK on his 460?
  7. B

    Super M gas tank mount

    If super m yes, smta no
  8. B

    IH 234 Mounted picker,,with husking bed and sheller units

    I have a 234 I would sell, it has the live points. I have both the sheller unit and the husking bed, it has the cylinder lift subframe and brackets for a 400 and 450 which I believe will work for the smta and 560. If you want to use it much it will need stalkroll knifes. If interested its...
  9. B

    fixing burnt tractors

    That tractor looks amazing! I cannot wait untill my 400's look that nice. Im glad that block worked out for you and kept your project going.
  10. B

    fixing burnt tractors

    their was oil in the rearend yet but no water or oil in the engine. not sure of how it cooled down.
  11. B

    fixing burnt tractors

    I was very determined when I started this project! I have now learned that I would have be futher ahead buying a good one. I have so far completly dissasembled it and sandblasted everything inside and out, then ressealed the gear case and put the rearend/transmission back together with differnt...
  12. B

    fixing burnt tractors

    Farmall Super MTA
  13. B

    fixing burnt tractors

    hi just curious if any of you have any experience fixing tractors that have went thru a fire? Im in process of fixing a smta that was in a very hot barn fire and im starting to question if the cast looses its strength. the fire was hot enuf to melt the hydralic pump partly off and warp the frame...
  14. B

    Ear Corn Picking in SE MN 2014

    Kirk nice pictures, my Dad has run a 234 on a 560 for many years in north east Ia, he to was a dairy farmer and belived in wide rows.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top