Recent content by Cannedman

  1. C

    D3B Ser# 23y0467

    Got it back together and everything is working great. Thanks for all of your help and have a great day.
  2. C

    D3B Ser# 23y0467

    I think I have found the problem with the steering. Where the water was in the bottom of the compartment it got up to the brake drum and got water and oil on the brake lining. When you push on the steering for the right side the brake does not grip it tight enough to turn. I am going to spray...
  3. C

    D3B Ser# 23y0467

    Made the adjustments and still no steering. Today I am going to try to remove the cover and see if I can see anything. Pulled the cover on the right side and in the bottom there is about an inch of water took dry vac and got it out. The person that had put the new clutches in left out 4 bolts...
  4. C

    D3B Ser# 23y0467

    Thanks Bob I will give it a try.
  5. C

    D3B Ser# 23y0467

    I have a D3B dozer and the service manual that came with the dozer is not for this dozer. It starts with 23y1 and up. My problem is the steering clutch for the right side is not working. The service manual that I have shows adjustments but they don't look anything like what I am looking at...
  6. C

    D3B Dozer

    Thanks and have a great day.
  7. C

    D3B Dozer

    I have my service, owners and parts manuals ordered. Can someone please tell me what fluid to the unit uses in Transmission, Hydraulic and rear end? Thanks and have a great day.
  8. C

    D3B Dozer

    Well I bought the dozer and brought it home. I will post some pictures soon. Thanks to everyone for their help.
  9. C

    D3B Dozer

    Thanks I will probably have some questions if I purchase it. Have a great day.
  10. C

    D3B Dozer

    Thanks Bob.
  11. C

    D3B Dozer

    Thanks D3B.
  12. C

    D3B Dozer

    Thanks Bob.
  13. C

    D3B Dozer

    I am looking at a 1979 or 1980 D3B dozer. It has 80% under carriage; 6 way blade; pedal steer; new clutches; 3600 hours. The owner says it is a good work horse but if run real hard it can use up to two quarts of oil by blow by. Does anyone know if this engine has sleeved cylinders or not? Also...
  14. C

    Ford 555 4 x 4 transmission

    I have pulled the engine on my Ford 555 and in the process of having it rebuilt. My thoughts are while the engine is out rebuild the transmission also. Has anyone tackled 4 x 4 power reversing transmission? I have not been able to find anyone close that rebuilds them. The mechanic that is...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top