Recent content by CaseOhio

  1. C

    Case 351 clutch pressure plate

    We are replacing the clutch disc, pressure plate, and throw out bearing on a Case 351 tractor. We failed to take a picture or keep the old clutch release fingers. The rebuilt pressure plate doesn't seem to have the correct release fingers installed. We cannot get the correct adjustment on the...
  2. C

    Case 830 CK Draft Arm Issues

    Thank you all for the input, Not aware of too much weight on lift arms or using a scraper blade. Could be linkage. Linkage was very rusted and not all free moving. Might be a word to the wise to check your linkage. Remove center floor board, DOM sensitivity lever, and arm from Draft control...
  3. C

    Case 830 CK Draft Arm Issues

    Back in July we started troubleshooting issues with our 830 CK Draft Arms not lifting. Thanks to all the advice we were given. Checked out the Draft Valve, Aux Valve, Flow and Pressure leaving Aux Valve to Draft Valve. Good Pressure. Next-Removed the Rockshaft Housing. Check out the photo. The...
  4. C

    Case 830 CK Draft Arm Issues

    Thanks! We will try that.
  5. C

    Case 830 CK Draft Arm Issues

    We have a Case 830 Comfort King. Plowed with it in the spring with a semi mounted plow. Went to use it for baling and noticed the draft arms will not raise. Checked out the draft valve and everything seems in working order internally. Tried a different draft valve and no change. Arms won't lift...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top