Recent content by catfish-65

  1. C

    Which oil to use?

    Thank You Guys! Yes I try to let the hose heater run for an hour before I start, but sometimes time doesn't allow for it. I think that a good 10w-30 is what I am going to go with. Thanks again!
  2. C

    Which oil to use?

    I have a gas 2510 that I use here in Minnesota for snowblowing, any suggestions on which weight oil should I use? Thank you!
  3. C

    210 Windrower

    Left pedal down, and right pedal up worked great! Thank you all!
  4. C

    210 Windrower

    Hello, I just bought a IH 210 Windrower mainly for the engine, but i have to get it home, Anybody familiar with these devils and how I can make it freewheel to pull it onto the trailer? Thank You!
  5. N

    what I found in the garage

    I've had a mouse problem again in the garage and have been setting traps. Yesterday evening when I went out to check the traps, I heard a loud buzzing. Thought it was some kind of large bee or wasp. Looked around and a humming bird had flown into the garage! He flew around a bit, then...
  6. C

    Add on 3 points?

    I have an 49 H with the dual hydraulics and was thinking of adding an aftermarket 3 point kit. Has anybody done this? Do they work decent? Any suggestions on brand or source for them? Northern MInnesota. Thank You!
  7. C

    Weak Loader on Kubota

    I removed the quick disconnect to the joystick and put the gauge on the end of the hose where it would have normally went to the cylinders so it wasn't trying to lift anything at the time. How can I tell if they are stalling, and where do you think the adjustable valve would be. I went to the...
  8. C

    Weak Loader on Kubota

    I have a Kubota B7200 with a Buhler (Allied) #95 Fronte end loader on it. It is worthless the way it is. Weak, weak, weak! I put a pressure gauge on the hose going to the cylinders and it had 1100 PSI. Where could I start? I realize it is not going to lift a locomotive but i would sure like to...
  9. C

    H Stuck rear wheels

    Thank you for your ideas, and the picture of the brake assembly! I will take the cover off and look at them but not tonight, it"s supposed to be -20 degrees! I think it may have to wait for a while!
  10. C

    H Stuck rear wheels

    I recently bought an H that has not been run for 3 years and has been sitting outside with the parking brakes on. I went to move it and I can"t get the rear wheels to break loose. Do you think the brakes are stuck, or could there be water in the rear end and it is frozen due to MN winter? If it...
  11. C

    Rear Rims for WD 45

    Looking for suggestions on what to do about my rusting out rear rims for my WD 45. I was lucky to find some decent front replacements but now face the rears. I don"t care about the power adjust, I have heard of combine rims, I have heard of new ones made by someone, and I have heard of repairing...
  12. C

    WD45 rear wheels

    Hello, I am putting a loader on my WD-45 and need to widen the rear tires out. Let me tell you they are rusty, rusty, and rusty!!!! I am try to turn the "3/4 locking cam clockwise and then I will fire it up and hold the brake on one side at a time, and boom they should go apart! Let me know if...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top