Recent content by catldavis

  1. C

    Ignition problems

    You nailed it! Amazing work! I can’t believe you got it from a picture. I touched the brown wires to that terminal and it turned it over fine. This site is great.
  2. C

    Ignition problems

    I’m really new to tractors. Have a Long 350 that ran rather well. I allowed my son to use it and when I went to start it up again, there were two longer brown wires hanging down by the brake pedal. I tried to start the tractor but the push button didn’t do anything. I took the dash loose and...
  3. C

    Loader Help

    As an update, I was able to get the lower plug and the vent plug out. I drained the vanilla milkshake out of it in preparation for new fluid. Thank you everyone for all of your help.
  4. C

    Loader Help

    There is a vent on the upright, high up. I’ll see if I can back that out and fill from there.
  5. C

    Loader Help

    Thanks for the info. There is a plug on the upright, down low. I looked at it closely, and I thought it might be welded in, but that doesn’t really make sense. I wonder if I should just put some serious strain on it to see if it will back out?
  6. C

    Loader Help

  7. C

    Loader Help

    Hello everyone..I bought a Long 350 tractor that has a loader. I have very limited experience with tractors, and even less with a loader. One of the hydraulic hoses for the tractor was leaking so I need to replace the hoses. My question is, it appears the hydraulic reservoir is in one of the...
  8. C

    Golden Jubilee - engine locked?

    Undate, lowered one wheel and tried to rotate other tire back and forth..At first limited movement, but I stuck with it and it slowly started turning the engine. I was able to get almost a full rotation before I stopped. I put some more MMO in the cylinders to soak and will try again in a couple...
  9. C

    Golden Jubilee - engine locked?

    Thank you, wasn’t aware, I’ll try again.
  10. C

    Golden Jubilee - engine locked?

    Well, the plot thickens..I put MMO in the cylinders yesterday and let it sit for about 24 hours. I jacked up the rear end today. I attempted to put it in gear but it seemed to only want to go in to two gears. The problem is, I don’t know which two gears as the shifter can go over a lot to the...
  11. C

    Golden Jubilee - engine locked?

    Hello all…Newbie here, I have a GJ that has been parked for many years. I want to see if I can get it running. First, I’m pretty sure the engine is locked. What’s the best procedure to see if the engine is locked? I did a forum search and it appears put it in 3rd or 4th and try to pull it to see...
  12. C

    Lawn Chief Tiller

    Hello all…I’m trying to resurrect an old Lawn Chief CA5 tiller. I can find a parts diagram with belt info, but no diagram on how the belts should be routed to use both forward and reverse. A long shot, but does anyone happen to have one or can you describe how the belts are routed? Thanks in...
  13. C

    Need Help, Jubilee Just Won't Start - Video

    Yes sir, will do and return and report..
  14. C

    Need Help, Jubilee Just Won't Start - Video

    I worked on the tractor today. I tried to get the old points to fire the tractor. However, I realized that the contact on the arm of the points was lower than the other contact. Therefore, only 2/3rds of the actually contacts were touching. I can move it up but it just fell back down. I don't...
  15. C

    Need Help, Jubilee Just Won't Start - Video

    Thanks JMOR - and everyone else - or all of your help. I'll be busy most of the week but will work on trying to get the current points firing on Friday. I have purchased some Blue Streak points so I'll have them on hand when the time comes:
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top