Recent content by cazzhrdwd

  1. C

    New Holland Stiff Foot Pedal

    I've got two LS190's with stiff foot pedals. One is the tilt, the other is the main boom. I'm familiar with the pedal bushings getting loaded with rust and grit and causing the same issue. Those aren't the issue now, it is in the valve somehow. They're so stiff that the pedal just stays engaged...
  2. C

    Restoration of Grandpa's H is done!

    Very nice ES, Lots of work and much fun.
  3. C

    steering wheel restoration

    My wheel is just steel, all the plastic is gone. I'd be great to get it restored, but might not be anyone out there reasonable in price.
  4. C

    steering wheel restoration

    Has Minn-Kota come back in business or is there another place people are using now to restore steering wheels. This MTA needs it done.
  5. C

    Super MTA steering universal joint

    That's what the parts guy said, but the cross is actually a 1/16th longer than the old one on each side. The new caps are even much larger inside diameter than the old ones. The shaft side was relatively easy to bend out a little, the other side seems like cast and I was a little unsure about...
  6. C

    Super MTA steering universal joint

    I just got one for my MTA. The one from IH was a 1/16th of an inch too big all around, had to do a little bending and shaping (which I wasn't happy with) to get it in. Couldn't get the caps to press in flush which made for a real bear putting in the retaining clips. I'm surprised it worked out...
  7. C

    Re: 3pt log splitter

    I was pleasantly surprised, I'm going to try a four way on it. :)
  8. C

    3pt log splitter

    I finally got the splitter put on. I was quite surprised about the speed. I've run several splitters on wheels and I saw no difference in the speed. As the tractor ran at an idle, I got down to the last gnarly pieces. It went through the first one and stopped dead on the next. I bump up the...
  9. C

    3pt log splitter

    Do you think the one you have is slow? Which one did you buy? I've heard that could be a problem, the RPM's would have to be kept up. I'd like it to be somewhat fast with low RPM's
  10. C

    3pt log splitter

    What do you guys think about putting a log splitter on my SMTA. Pros, cons or any suggestion of a good 3pt splitter.
  11. C

    painting

    I have an MTA that needs a full repaint. Its to much for me. Is there anyone in the mid atlantic close to Baltimore that would do a good job on it?
  12. C

    gravity wagon auger

    I have an auger that came off a 4 ton feed bin. It is a 4 inch auger, with motor and steel unloader. Is there a boot that I could purchase to install this auger on my gravity wagon.
  13. C

    ASAP: broken front axle IH 574

    what a great girlfriend
  14. C

    Farmall H starting question

    My starter did the same thing Went through 2 buttons (temper temper) before I figured the starter. It needed a total rebuild.
  15. C

    Red Power Roundup 2011 pictures and videos

    Wow really cool Kirk, thanks. My favorite was the IH mounted corn picker. I would love to have one of those.
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top