(800) 853-2651
SHOP NOW

Recent content by cbrab

Yesterday's Tractor Forums
  1. C

    Ford 1900 clutch issue

    So it turns out that both pins in the clutch fork were broken allowing the fork to move in ways it shouldn't and throwing off its ability to move the bearing correctly. I believe that's the main, if not the only culprit to the issue I was having. Can I just use some heavy fence wire as...
  2. C

    Ford 1900 clutch issue

    I noticed that theres only 1 pin on the fork, the other ones missing, but it looks like it's still functional. The fork can get misaligned and cause issues with the throw?
  3. C

    Ford 1900 clutch issue

    Very thick, clutch must've been replaced recently.
  4. C

    Ford 1900 clutch issue

    Which part do you mean? Here's a couple pictures of the adjustable rod that pivots with the pedal and throws the bearing forward inside the bell housing
  5. C

    Ford 1900 clutch issue

    I took off the pressure plate today and it seems fine. Looks like the problem is that for some reason the throw out bearing isnt traveling out far enough to even reach the pressure plate release levers. Maybe in fact the clutch was replaced before I bought it and whoever did the job put a wrong...
  6. C

    Ford 1900 clutch issue

    So I split the tractor today and the first thing I'm wondering is how far that throw out bearing should travel when the clutch pedal is depressed? It doesn't seem to move too far, I'll get a measurement tomorrow. Tomorrow I'll take off the pressure plate and check it out. Any tips for testing...
  7. C

    Ford 1900 clutch issue

    I do. I saw that the pto clutch can be adjusted through that hole and of course the pedal linkage l. Not sure if I saw any other adjustments for it.
  8. C

    Ford 1900 clutch issue

    I I did. It seems to
  9. C

    Ford 1900 clutch issue

    That's what I thought and I'm not seeing any gap. Thanks
  10. C

    Ford 1900 clutch issue

    I've already adjusted it as much as possible and still nothing. I'm hoping I can free it up driving it around and stomping the brakes
  11. C

    Ford 1900 clutch issue

    Yes, the whole distance that the pedal can move is free with no resistance except for a bit of resistance at the last inch or so of travel but I think it's because either the clutch disc and or pressure plate is stuck forward. How would you suggest addressing that? Thanks
  12. C

    Ford 1900 clutch issue

    Can you see a gap between the clutch and flywheel when it's free?
  13. C

    Ford 1900 clutch issue

    Hmm, that's possible. I don't think I stressed the clutch too hard other than spinning the wheels in the dirt in 4wd. But maybe that would have been enough. Apparently the clutch was replaced not too long ago but who knows if that's true or if he just wanted to sell it.
  14. C

    Ford 1900 clutch issue

    Oh okay. I'd say the conditions were right I guess, bell housing had been sitting in damp soil when I got it stuck and it probably couldn't vent any moisture. But when it gets stuck its usually the clutch disc stuck to the flywheel right? Would that make sense that the release fingers would be...
  15. C

    Ford 1900 clutch issue

    I recently bought a Ford 1900 with the dual stage clutch. I should say I noticed the gears liked to grind when shifting, I thought it was just me getting used to having to idle down and wait a second before shifting and I'm still unsure if it was my error or something in the tractor. My second...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top