(800) 853-2651
SHOP NOW

Recent content by chuck s

Yesterday's Tractor Forums
  1. C

    6605 combine engine in 4020 john deere tractor

    the eaisest way that I have done one is to add 2 inches to the frame, have a 2 inch block made between the front of the block and front pump mount, then use a 4230 front half pump coupler. Nothing needs to be done with the oil pump and no the 4020 oil pan will not work. The options here are to...
  2. C

    7700 combine to 4010 motor swap

    Doing one now. I found the easiest way is to strech the frame 2 inches. Have spacer blocks made to go in between the engine block and the hydralic pump mount. Then use a 4230 pump drive and mount it to the pump. This is longer and with the added thickness of the front drive pulley mackes up...
  3. C

    4440 starter

    Forget using the original starter and replace it with a gear reduction starter off a 8000 series. Cost me arround $3-400 and needed to change the main battery cable to the starter but the differance it made to my 4430 engine in starting was almost unbeivable. Chucky
  4. C

    Tractor Buying Advice Revisited

    I agree with what the others are saying about avoiding the 4620 and the 6030 and finding something newer and you already have to many tractors. If you really want to succeed you have to start with having quality machinery that will get the job done. You stated that the 4320 will do your work...
  5. C

    466 Deere max bore?

    Yes I was last night in your town. That bar talk is the best;) Chucky
  6. C

    magazine

    I think it is getting better, just my opinion Chucky
  7. C

    466 Deere max bore?

    I know of 2 tractors that run/ran a 5" bore one on deisel and one on LP and gas( the one Fritz has) and the problem is that the liners are to thin and crack letting water and antifreeze in the oil. Fritz then dropped to a 4 7/8 and still had the same problem. You might be able to do this if...
  8. C

    gear reduction starter for a 1206

    Is there a gear reduction starter available for a 1206. I added on to my 4320 a what a differance it made. Would be nice if on was available for the 12 also. Thanks Chucky
  9. C

    Help Buying My Frist John Deere

    I've got a similar place that I mow and push snow and so forth. A JD 4310 that I have works great for that. It's got a 6' belly mower, 5' brush mower, and a 430 loader that has a bucket and a 7' snow plow off of a dodge Dakota that mounts to the quick connect on the loader and the rear...
  10. C

    4430 drawbar

    A 1066 draw bar should work. I used the rear half of the two peice IH drawbar to make a pulling hitch had the same pin size and slide right in. Chucky
  11. C

    Need a 350 d hydralic pump and 3pt adapters

    A freind of mine needa a hydralic pump and 3pt to fast hitch adapters. Anybody know where I could find these? We are located in the Il, Wi, and Ia tristate area. Thanks Chucky
  12. C

    IH 466 breaking rockerarms??

    Had this happen with a 1456 found out that the camshaft key was very wore and was causing the valve timing to be off. To check this remove the valve cover and rotate the engine until a exhaust valve is about half way open and then rotate the engine in the oppisite direction. The valve should...
  13. C

    Whats the Chances 65 4020

    I would at least take a straight edge and a depth mic to the top of the pistions and check pistion hight to make sure that they are all the same. Thanks chucky
  14. C

    806 cab

    Just the parts and labor for a tractor that already have air needing repair can run into $2000+ not including cost of cab and what it will take to mount a compressure on the 806. Something like a 886-986 will be what would replace your 806. There is one for sale on this site on photo adds for...
  15. C

    806 cab

    Update to an 86 series won't be as much to boot as trying to replace the cab and getting air to work on that 806. Chucky
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top