(800) 853-2651
SHOP NOW

Recent content by Coalsmoke

Yesterday's Tractor Forums
  1. C

    Changing the oil in an old Troybilt Horse tiller

    Thanks guys, that explains why I can't find the second plug. I must have one of the older horse tillers.
  2. C

    Changing the oil in an old Troybilt Horse tiller

    Hi Guys, I just bought an old troy built horse rototiller with the old Tecumseh engine on it (30 years old?). The wheel seals are leaking on the tiller and the gear oil is low so I'm going change it before using the tiller. I'm getting conflicting information. The manual seems to indicate that...
  3. C

    Oliver 1365 / White 2-60 hydrualic pump upgrade question

    Hi mark, thank you, I have copied your number down and will call next week. I am getting married this Saturday and will be tied up for the next few days :wink: I appreciate the help you guys are giving me on this, thank you again. I have a local Agco dealer that is very good and they are...
  4. C

    Oliver 1365 / White 2-60 hydrualic pump upgrade question

    Ok I got the rear cover off and took some notes. The spline on the PTO pump will have to have 10 teeth, and will measure 1" valley to valley or 1 5/32" spline to spline in diameter. I got an email back from SSB in regards to using the 42L/min pump in place of the A22X pump, they were of no...
  5. C

    Oliver 1365 / White 2-60 hydrualic pump upgrade question

    Mark, what is your website, I'd like to check it out. Thanks.
  6. C

    Oliver 1365 / White 2-60 hydrualic pump upgrade question

    Hey Butch, how much would you like for the kit? Also, how does the loader pump plumb into the tractor's hydraulic system? Please feel free to send me an email at stephan.pawloski AT gmail.com,
  7. C

    Oliver 1365 / White 2-60 hydrualic pump upgrade question

    Yes it sounds like that is what I need to speed up the loader, the only thing is I need the entire kit, and I'm not sure what it consists of, and I also have to check to see if it is a tapered or splined shaft in there. Apparently two types were used. I still like the idea of getting the...
  8. C

    Oliver 1365 / White 2-60 hydrualic pump upgrade question

    thanks guys for the replies. I will open the back up and see what I have sitting in there. Do you know where I could get that rear mount loader pump kit?
  9. C

    Oliver 1365 / White 2-60 hydrualic pump upgrade question

    Hi guys, I have a 63HP White 2-60 (apparently it is very similar to the Oliver 1365 in parts) with an allied 580 loader on it. The hydraulics on the loader are very slow and I would like to do something to make it faster and more useable. I found on the back of the pump currently on the tractor...
  10. C

    8,000lb 2wd tractor in snow - chains needed?

    Thanks guys for the input, I'll get some chains on order.
  11. C

    8,000lb 2wd tractor in snow - chains needed?

    Hi guys, I just recently bought a White 2-60, 63hp 2wd, and I estimate it to be in the ballpark of 8,000lbs with the calcium ballast in the rear tires and the allied loader. It has a diff lock that works well as well and good traction tires. For those that have run this type of setup in the...
  12. C

    Looking at buying a Gas Dexta, but I know nothing about them

    I tried the gmail account, looks like they have gmail blocked now too.
  13. C

    Looking at buying a Gas Dexta, but I know nothing about them

    Ok, thanks for the additional info. I will check that it was repaired properly and not taped together to make the sale.
  14. C

    Looking at buying a Gas Dexta, but I know nothing about them

    Hello, I was looking to buy a ford 8n or the like for my small sawmill / firewood business when a local farmer said he has a mid 1960's gas Dexta with a 6 foot back blade and new rear tires, and new water pump for $2,000 canadian that he would like to sell. It got my attention, but I am...
  15. C

    Project Chicken Bones - Update

    Wow that looks really good, nice work!
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top