Recent content by Codylk2019

  1. C

    Case C50 PTO

    I’m working on a tractor for a friend. He is having a problem with the PTO on his Case C50. From what he is telling me, when mowing with a brush hog, the pto will intermittently dis-engage and re-engage causing damage to the pto shaft on his mower. When engaging the PTO lever, it spins as it...
  2. C

    1953 Ford Jubilee Compression Test

    Update: thank you all for the great replies and trouble shooting. Sorry for the long post, here is what I’ve discovered/ done thus far 1. I was missing the rotor clip and ordered 2, one for a spare. Upon installing and correctly timing tractor with a timing light, it still seemed as if it was...
  3. C

    1953 Ford Jubilee Compression Test

    Thank you all for the great responses, I installed the manifold gasket this morning so I should be on my way to testing it out again. Yes the spark when I tested it would jump the gap and was a good blue spark. But I still need to check the distributor advance. I’ll report back.
  4. C

    1953 Ford Jubilee Compression Test

    Thank you! I’ve replaced all fluids throughout the tractor. I’m going to put a timing light on it once I have the manifold gasket replaced to fine tune the static timing I did earlier. I’ve heard that I should check the advance weight in distributor, I don’t know what to look for there if you or...
  5. C

    1953 Ford Jubilee Compression Test

    I have a 1953 Jubilee that I inherited from family a few years back. Prior to me inheriting the tractor, it had sat in a barn for quite some time. I’m going through the tractor as much as possible, replacing all necessary worn components (points, plugs, wires, wiring harness, ect). I’m having...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top