Recent content by Covert

  1. C

    Saw a To 20 for sale

    Would be neat to own the 781'st tractor made. I wonder who owns' model 1.
  2. C

    6V starter

    I don't know about turning over twice as fast. But the starter will take half the amps to turn over as it did with a 6v system. E=I*R. 2 times the volts half the amps. I don't know the internal windings of the 6V starter but I do know, if it can handle the amp load from 6V it can handle the...
  3. C

    TO 35 gas line

    I don't know what you are using, but for my To-20 I use 1/4' break line tube, there is no insulation. and TO-20's far as I know have know in line filters. I'm guuessing your's should not either. All the filtering is done through the the screens on the valve inlets, sediment bowl screen, and...
  4. C

    Restoration begins!!!

    WD-40, PB, and all of the pentrating lubes are nice but I have never found a bolt I can not bust off with a tourch. There are many types off gas to buy when propane can't do the job I use Nap gas. If the nut will not break free you can break the bolt with a breaker bar. Heat the nut up to...
  5. C

    Winterizing the Fergie.

    Was reading up on the TO history, TO-20's were used in an Antarctic Exposition. I plan on using mine in the winter, I bet it does fine.
  6. C

    How do I check generator?

    If you have a generator after you start your tractor you can un-hook the battery and it should still run. Current is measured through inductance. If you want to see how many amps your generator is putting out you need an amp probe, or multi-meter with amp reading. You can not get and amp...
  7. C

    Right wheel has breaks again...

    I use a regular 2-ton car jack that I put ontop of a chuck of wood and jack the rear up right in the middle works great. And where is your grease build up coming from? When I first got mine it was loaded with Grease.
  8. C

    New TO-30 Fuel Tank

    My TO-20 had been untouched for 11 years sitting out in the elements. When I first drained it so much sludge and rust ran out I wondered if I had a tank left. I took a flashlight and looked inside it was covered with sludge and rust. My uncle told me to buy Draino Crystals, removed the tank...
  9. C

    Fan Blade/Water pump pully ?

    yeah pully part seperated from the hub, got a new one today and its about 4 times as thick, this one was machined not pressed together so this will never happen again.
  10. C

    Fan Blade/Water pump pully ?

    1950 TO-20
  11. C

    Fan Blade/Water pump pully ?

    Put a new belt on today, ran her for a few min's and the pully attaced to the fan seperated from the part that drives the fan. Now this pully is over the water pump. Do the the fan and pump share the pully. ANd if so where do I buy a new one?
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top