(800) 853-2651
SHOP NOW

Recent content by Crinton

Yesterday's Tractor Forums
  1. C

    Another Case 530 Serial Number Issue

    Thanks, Joe, will do. This has been a long and winding road! Cheers, R
  2. C

    Another Case 530 Serial Number Issue

    Thanks, again, Joe; I really appreciate all the help. I’ve read through the procedure for splitting the tractor between the triple range and the 4-speed transmissions and it’s not as daunting as I first imagined. I’m pretty sure I can handle that, and remove the hand clutch assembly. I...
  3. C

    Another Case 530 Serial Number Issue

    Confirmed - foot clutch engaged, triple range in neutral, hand clutch disengaged (pull rearward), (my) Pin1 pulled out (disengaged), Pin 2 also out, TR input gear turned (with some difficulty) both ACW and CW, drive shaft and adjusting yoke (13) turned together. I suppose this means that the...
  4. C

    Another Case 530 Serial Number Issue

    Thanks, Joe. There is a procedure in the IT manual and I have pasted it in below. My plan was to add a photo file but hey-ho, modern technology got the better of me and it worked this way! I haven't read fully read it yet but, glancing at it, I think this is a job for the winter. Of course...
  5. C

    Another Case 530 Serial Number Issue

    The power steering pictures I posted are all the new system I designed and put together. I completely removed the manual steering box (top and bottom portions) and those are what’s shown in the last pictures sent (1691a to 1694a, inclusive); these manual steering parts are no longer required...
  6. C

    Another Case 530 Serial Number Issue

    Thanks, Joe. Pictures are attached of the original steering gear that I removed to accommodate the orbital valve. It seems to me to be the early utility models and IT manual supports this. I had a CNH link earlier and got some good parts diagrams covering the hydraulic system. They didn't...
  7. C

    Another Case 530 Serial Number Issue

    Thanks, Joe. I didn’t get out to the workshop yet - yard/garden jobs are taking longer than I expected! Yes, I understand what you are saying about the pins and pin locking setup. I’m anxious to get on it but it will be an hour or two yet. Will let you know what I find and take pictures...
  8. C

    Another Case 530 Serial Number Issue

    Thanks, Joe. That’s exactly what I have. Your instructions are much clearer and that is the adjustment procedure I was following, with the foot clutch pedal held down using a tie-down strap with ratchet tensioner. That triple range cover will be coming off again this afternoon and I’ll be...
  9. C

    Another Case 530 Serial Number Issue

    Thanks, DRussell: It’s a bit late to move the tank now and, of course, I have thought about this since realizing the left steering issue. The key for that tank, its capacity and location, is to maintain the oil level conditions in the main torque tube reservoir since it augments that reservoir...
  10. C

    Another Case 530 Serial Number Issue

    Thanks, Joe. Look forward to hearing from you later.
  11. C

    Another Case 530 Serial Number Issue

    Here are the other pictures. I reduced the resolution.
  12. C

    Another Case 530 Serial Number Issue

    OK. so here are photos! I hope you don't think that I've butchered the tractor, I'm just trying to make it work for me and therefore made a few mods! I added an FEL, the arms and bucket were off an 8N I'd had for a while, arms and bucket were seriously straightened out and reinforced - the...
  13. C

    Another Case 530 Serial Number Issue

    Looking back at manuals and thinking it over, I have to conclude that I’ve been a bit of a dumb cluck going down this shuttle shift rabbit hole. Sorry about my confusion, guys. Ah, well, have to press on - just hope it’s not going to be another tractor split job to get it right! I’m already...
  14. C

    Another Case 530 Serial Number Issue

    Thanks mEl and Joe for your posts. OK, accepted, I do not have a shuttle shift! I just looked back at the Case Operator’s Manual copy I got from Jensales and think now that I must have rushed through the operating controls section. I only saw mention of a shuttle shift and assumed that’s what...
  15. C

    Another Case 530 Serial Number Issue

    Hey, thanks Joe and Tgrasher! Joe, you have some different serial numbers from those I took from the YT S/N guide. Your thoughts about the way these tractors were built and the assignment of series type, serial numbers and engine assignment make a lot of sense based on my searching. I have...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top