Recent content by crwchf16

  1. C

    Case 310G Idler Wheel Wear Plate

    Hello again, Once again my old 1966 Case 310G is in need of help. The left front idler wheel bounces all over and frequently tries to throw off the track. I checked the wheel bearings and they are still tight so I think the wear plates must be shot. The original Case part number was 31797 but...
  2. C

    310g Diesel Wiring

    Hi guys. So my 1966 310G needs basically all new wiring. This brings up 2 questions. 1. Does anyone make replacement harnesses? (Long shot, I know) 2. As long as I have to go this deep anyway, I'm thinking about replacing the generator/regulator with an alternator. Has anyone done this? What...
  3. C

    Gearmatic Model 9 Restoration

    Added a photo of what I'm dealing with
  4. C

    Gearmatic Model 9 Restoration

    My 1966 Case 310G is back up and running. That's the good news. The bad news is the Gearmatic Model 9 winch for it is heavily rusted on the inside. I've been tryinig to work the drum and outer bands loose but there is almost no room to work in there. The outer bearing for the drum is shot but...
  5. C

    Aftermarket Pinion Shafts

    So we got the final drive pulled apart on my 1966 Case 310G. As expected, it wasn't pretty. It looks like it hasn't had any oil in it for years now and so all the bearings are shot. The pinion shaft is pretty chewed up as well but thankfully, all the rest of the parts look salvageable. I can get...
  6. C

    Case 310G Transmission Oil

    You're right, I should have said that it was 90 weight
  7. C

    Case 310G Transmission Oil

    Sorry if this has been asked before but I can't find it. I'm doing some work on my 1966 Case 310G to include flushing and replacing the transmission fluid. The manual calls for mineral oil which from Case, costs about $20 per quart. Are there any aftermarket substitutes for this? The same...
  8. C

    Case 310G track breakage

    So after a lot of research and head scratching I've determined that there is a problem in the final drive and I need to tear it down to find what's wrong. You might remember me asking about this a few months ago. My first hurdle is to break the track but I'm having trouble identifying the king...
  9. C

    Case 310G Track Problem

    Thanks for the input guys. I'm hopeful that the problem is just a piece of ice. Either way I'll be giving the old beast a complete overhaul this summer
  10. C

    Case 310G Track Problem

    Hi all, I was using my 1966 Case 310G to clear snow from my driveway and the left track locked up hard. I could reverse and travel about 6 feet, maybe half the overall track length and it locked up again. It was like it had hit a mechanical stop. At first I thought it was ice and it may yet be...
  11. C

    Hello from Vermont

    Hello all, I'm Tim from the Northeast Kingdom of Vermont. I've got two old tractors, one 1950-something 8N and also what I think is a 1966 Case 310G diesel crawler. Both were inherited from my father. The crawler runs but needs restoration, the 8N won't run at all but I hope to restore that...
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top