(800) 853-2651
SHOP NOW

Recent content by D1206

Yesterday's Tractor Forums
  1. D

    914 IHC Combine

    The driveline was pretty stout, biggest thing with more horses is they would eat it, just not hang onto it as well. If you don t push too bad, that Allis would probably work good. Dad used our 5488 IH, 190hp on it one fall to finish up & long as you didn t push too hard, it was ok. The 914s...
  2. D

    914 IHC Combine

    There s a slip clutch on the header auger, we used to run it fairly loose because it s way easier to unplug header auger than feeder house or cylinder. No factory reverse on these machines. Big long cylinder wrench should be hanging on feeder house. If you go by what I posted before too, tractor...
  3. D

    914 IHC Combine

    If it s a late model white top, not much difference. The early ones didn t have a detachable header. Midway thru production had slip clutch on driveline ahead of gear box. Pretty reliable machines, but are 40 plus years old now & finding decent one in good shape might be tough. 100 to 125...
  4. D

    harvesting capacities

    Man, that s a pretty good day 1000 acres. Hard to beat those 23s for simplicity too. Did a good job in wheat,oats & canola. They really shined in barley. Tough to beat.
  5. D

    Planning on pulling a 7721 425 miles

    I used to drag/ haul equipment around for our local case/IH dealer in mid eighties. Not many 7721s, but lots of 914s, 14&1682 Pulltypes. The smallest truck we used was a 1900 IH single axle with 466 & 10 speed. Had winch & deck,probably around 12-15000lbs. We would still throw a 18.4x38 tire...
  6. D

    OT: Traveling to western Canada soon

    Drumheller area is a cool place to check out as well, the RedDeer river valley/ badlands are something to see for sure. Lots of old mining towns in area plus dinosaurs too. The Tyrell museum is defiantly something to check out too. Drumheller Alberta.
  7. D

    7130 case

    It frustrates me as well when people refer to an IH or after the merger as simply a case machine. Not so, after the merger there wasn t much of anything Case design left once Magnums came out. Combines, tillage, seeding & tractors was mostly IH & Steiger heritage other than some David...
  8. D

    7130 case

    One thing you seem to miss.. Its a case [b:5af9c7de69]IH[/b:5af9c7de69] 7130, the transmission was designed by IH based on the STS used in the 5X88 series tractors. Don't confuse this transmission with anything Case built pre merger. << This. These tractors were probably the most...
  9. D

    Is a 466 from 9600 same block for 644G loader?

    Thanx, I’ll pass this on.
  10. D

    Is a 466 from 9600 same block for 644G loader?

    Hi there, have a buddy who wants to replace his tired 466 in a 644G loader & he has found a good deal on a 466 from a 9600. Model in combine is 6076HH030. Model in loader 6076A. Anybody tell me if the combine engine will work, I realize accessories will need to be swapped as long as the...
  11. D

    diesel been sitting for 35 years startable??

    Bought a IH 4100 in summer of 2012 about 10 miles north of me. Seller thought it was at least 20 years since it had last ran. Me & a buddy threw a battery in it,checked oil & coolant & probably cranked about 15-20 seconds & she hit & took off. Quite a bit of crap came out the stack(it was...
  12. D

    Roll Call

    Nice 1460, looks like new
  13. D

    White 2-85 trans issues

    Update on the 2-85. He was home this week, started it up & told me if range lever is in neutral it can sit & run with clutch out. If he puts into hi or low range & lets out clutch, it stalls the engine. Now I've not been to see this tractor, I'm just going on what I've been told...
  14. D

    White 2-85 trans issues

    Ok, I will let him know & try that. He is away for couple weeks now, but can look at it once he's back. Thanx again for all the replies.
  15. D

    White 2-85 trans issues

    Got a buddy with a 2-85 that has transmission issues, acts like it's in 2 gears at once. Start it up with clutch pushed in & all ok,but if you let the clutch out it stalls the tractor. It can be pulled around not running & won't skid wheels,rolls easy. He said he was just disking one day & it...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top