(800) 853-2651
SHOP NOW

Recent content by danc1948

Yesterday's Tractor Forums
  1. D

    MF135 new water pump leaks issue

    It has taken awhile but after several false starts and using a recommended silicone sealant and finding a backing plate like the original my 1972 Massey Ferguson 135 has a new water pump on with no leaks so thanks to the forum for the help
  2. D

    MF135 new water pump leaks issue

    It has taken a while, but after several false starts and by using a suggested silicone sealant and finding a backing plate like the original I was able to get a new water pump on the 1972 Massey Ferguson 135 and all appears to be good so thank you for the help
  3. D

    MF135 new water pump leaks issue

    Used red I apologize I did not read a previous post of yours carefully enough and just now caught what you meant about the threads in the upper right hand hole thank you for that
  4. D

    MF135 new water pump leaks issue

    Yes sir thank you for the clarification on the sealant. I think I’m going to have to go that route and as you mentioned before I can put that same sealant on the threads. and under the bolt heads. if you blow up the second photograph that I posted you can plainly see the middle of the metal...
  5. D

    MF135 new water pump leaks issue

    Hello and thanks for your very informative replies. For starters, I did not know about blind holes and that’s what is on this tractor. And yes, for the sake of the picture I arranged the backing plate and gasket accordingly. There are four bolts on the pump, which cannot be removed unless the...
  6. D

    MF135 new water pump leaks issue

    Thanks for your help have enclosed a picture of the engine and the bolt holes where the pump attaches, judging from the pump that I took off I don’t think that the coolant can go in and out of those holes, but I don’t know for sure, but the washers on the original pump were just regular lock...
  7. D

    MF135 new water pump leaks issue

    Hello, looking for some advice and thoughts on why my new water pump is leaking. The water pump I replaced was not leaking but was making too much noise so I figured it was on its way out and as I had recently had to have the radiator repaired I thought I would replace the water pump. The pump I...
  8. D

    UK Massey Ferguson, 135 water pump confusion

    Hello took a picture of the side of my tractor where engine identification number should be I think maybe I see an H but I’m not sure but I’m passing it on.. after some more research have determined that the pump I need is most likely pump item number 150185. Yesterday‘s tractor have not heard...
  9. D

    UK Massey Ferguson, 135 water pump confusion

    Hello all thanks for the comments, thank you Jim for the photo showing the serial numbers will go check that out shortly. When I first realized I needed a new water pump I went directly to yesterday‘s as I had just recently purchased a brand new radiator fan for the pump that I have just taken...
  10. D

    UK Massey Ferguson, 135 water pump confusion

    Thank you for the information now I know it’s not just some crazy creation that someone did a while back. Just came back from looking at the tractor and could not find serial numbers that look like what you posted Jim there are a series of numbers right behind the fuel pump but because of all...
  11. D

    UK Massey Ferguson, 135 water pump confusion

    Hello and happy new year… some months ago had the misfortune that the bracket holding the alternator broke which bent the radiator fan and also trashed the radiator. after a period of time replaced the mounting bracket and repaired the radiator, purchased a new radiator fan from yesterday‘s...
  12. D

    IH b-275 banjo bolt fuel line problem

    Ok understand all that..I do have a torch and can heat a washer. However, I have one brand new one and I can probably scare up another from an auto parts store. having paralysis from analysis here but working on it. Thx danc
  13. D

    IH b-275 banjo bolt fuel line problem

    Hello Fritz, thank you for your comments. I think you could well be right. Have some time this afternoon to take off the pump purchase a tap and see if this works. Will order a new pump and I see that new banjo bolts are available. The only question I have at this point is will any old copper...
  14. D

    IH b-275 banjo bolt fuel line problem

    hi mule meat, I am going to order a new pump. I will tap out as described above the old one as a test run if it works I’ll leave it alone and keep the new one as a spare! The problem has been banjo Bolt and washer combination. I have a John Deere in my barn. I did the same thing put in hose barb...
  15. D

    IH b-275 banjo bolt fuel line problem

    As I was finishing the post above, I saw a new post from Jim B2with some information on the fuel line problem it was a long time ago on the original lift pump, but I took the top off then and saw the mesh that you mentioned ,after all these years I assumed it was a diaphragm. The tractor is a...
See more
Yesterday's Tractor Forums
Buy Tractor Parts Here Buy Tractor Manuals Here

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2025 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top