(800) 853-2651
SHOP NOW

Recent content by Daniel Dillon

  1. D

    Hand crank assembly on H

    Thanks all for the input, the hand crank itself is not the issue, but after hearing what is involved to replace the linkage through the bolster ! heck with that for now I will just be sure my starter and battery stay in good working order, can"t have any down time right now. I am really...
  2. D

    Hand crank assembly on H

    I enjoyed those pics, never had mine tore down that far, only thing I have had to do to mine is rebuild the lift all unit and rebuilt the top end, One of these days I plan to go over it better cosmetic wise, paint etc, but I still work mine. I think I did ok on it bought mine about 18 years...
  3. D

    Hand crank assembly on H

    In a pinch at times early in my ownership of my 1940 H I hand cranked it to start it and it worked well, however I had to custom make a hand crank handle to fit on what was left of the crank dowel sticking out the front end, it eventually broke off even more, so now there is not enough to work...
  4. D

    41 H Farmall fan belt pulley

    I will double check for sure, but when I rebuilt the engine top end all the new parts were for the 41 ( I thought ) engine and everything fit as it should, I even noticed the pistons and ring set up reminded me of a diesel, so this would fit with in line with a distillate fuel burner I assume...
  5. D

    41 H Farmall fan belt pulley

    Thanks Zach My book does not have this diagram, this helps, I am visual and I like to know what I am getting into.
  6. D

    41 H Farmall fan belt pulley

    Looks like I be pulling this apart, wish I had a better diagram of what is all there, what is the arm that has what looks like it has two spring loaded dowels in front of the fan blade all about? I know I need to get this corrected before I bother with the upgrade kit to a 12v alternator...
  7. D

    41 H Farmall fan belt pulley

    Reason I ask here as my book doesn't go into any detail here as it is just one of these IT shop service manuals, shows me a decent diagram but points out the different parts of the assembly that is about it.
  8. D

    41 H Farmall fan belt pulley

    I have a question regarding the adjustment on my main (crank to water pump) adjustment on my 41 H. Is further adjustment possible as I have screwed in my adjuster side as far as it will go and ran out of threads, yet it looks like it could come in another quarter inch. Is there any adjustment to...
  9. D

    H4 magneto Checked and gone through, no fire

    I appreciate all your help and suggestions, usually something simple holding up the show and this was no exception. I have tried to stay up with my old H and while it is tempting to pretty it up and make a show piece out of it, I am sorry I still work it. My next step will be to upgrade the...
  10. D

    H4 magneto Checked and gone through, no fire

    Well the suggestion of dressing the point contacts, on those new points seemed to be the culprit, did that! got spark at em with just hand turning put the mag back on the tractor, lined my timing mark back up, maybe 3 revolutions on the starter and it fired right up after sitting four years...
  11. D

    H4 magneto Checked and gone through, no fire

    Thanks I have considered that but was not sure, but that verifies that notion and it may go that way. I have tried to maintain a happy medium with this tractor keeping it OEM for the most part and I like the mag ignition set up, but if indeed my mag coil is getting goofy they don"t exactly give...
  12. D

    H4 magneto Checked and gone through, no fire

    Yeah I hope this takes care of it, need my H running, getting old to do some of grunting around the yard by hand :^) I know I shouldn't have let it sit as long as I did but getting back to it now has only rekindled my tractor interest and got me to thinking about the one I have never owned and...
  13. D

    H4 magneto Checked and gone through, no fire

    did just that and getting spark at points just hand turning, will pop it all back on in the morning and see if i get the big spark where I need it now
  14. D

    H4 magneto Checked and gone through, no fire

    Oh I will keep you all updated I did dress the points contacts ( even though they are new ) it was suggested I do so anyway, and I see spark at the points just hand turning the mag I hope that is a good sign
  15. D

    H4 magneto Checked and gone through, no fire

    Yes they seem plenty strong in that dept.
See more
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top